Help! Position of Viper logo on front fascia?

[1BADSNK]

Need Help. I'm trying to figure out if my 2002 GTS front fascia has been re-painted before I bought it. How many inches from where the hood meets the bumper is the snake head logo suppose to be on the front of the car? I have a suspicion that mine is too low.

I just had the 3M film installed and it doesn't match up to my car around the logo. Please post measurements. Thanks.

 

[99 R/T 10]

I think it is 3.3" from the top, but call Chuck Tator at 914-763-3136. He will know for sure.

This reply has been EDITED.

 

[BADVENOM]

according to my rt/10 manual the top of the medallion should be 3.3 in or 83 mm from the top of the facia

 

[Neil - UK]

adam96 quoted figures are the same in my 2000 service manual

 

[99 R/T 10]

My mistake, use thier numbers! I will edit the top reply for correct reference.

 

[1BADSNK]

My logo is right at 83mm from the top of the logo to the start of the hood. The 3M kit opening is about 71mm from the hood(even closer). So my car is fine it's the 3M kit that is screwed up.
I'll check in to correcting the problem. Thanks for the replies guys.