How do you ventillate your gen1 with blower

[v10sloboy]

I am having some blow by with the new supercharger setup just wanted to see how the gen1 guys run catch cans or pcv systems. I have some blowby after hard driving. With the catch can you can see smoke coming out of the filter when idling,after hard runs. I just don't want to run it into the intake and cause detonation. Pics would be great. Thanks John Lomant

 

[Schulmann]

Yes, PREVENT this blowby to get into your intake.
It is deadly for a supercharged Viper.
It will reduce your 93 oct fuel into a cheap 84 oct sauce.
The best is to vent it into the air.

 

[martyb]

I had the same issue with my Gen 1 Roe car. Sean sent me an adapter that replaces the factory fill cap. You then use a push in breather with a small filter attatched. I only have about 100 miles on since I added the breather, but it seems to work very well.

martyb

 

[v10sloboy]

Anyone with pics out there?

 

[Viper Wizard]

I am having some blow by with the new supercharger setup just wanted to see how the gen1 guys run catch cans or pcv systems. I have some blowby after hard driving. With the catch can you can see smoke coming out of the filter when idling,after hard runs. I just don't want to run it into the intake and cause detonation. Pics would be great. Thanks John Lomant

[/q

 

[martyb]

Thanks Chuck, that's the one!!!

martyb