How to change a side sill?

[John's 1995 Venom 550]

Just wondering if there is a book you could recommend - like a how to - to fix (or take apart) the 1995 RT/10 for minor changes. Currently I had a scratch drivers side sidesill and would like to know how to change it for a new one or if is possible to repair the sidesill. Does Dodge still sell this part and for how much? Or is it better to get it elsewhere, if so where?

Thanks,

John

 

[Ulysses]

If you decide to remove them yourself, watch out for the sharp edges.

 

[Jerry Scott[CO]]

They are very easy to remove. Remove the four hole plugs in the door with a very thin putty knife. They have release tabs 180 deg apart, so just slide the knife under the edge of the plug and lift gently. The one under the door is a little tougher to get out, so just take your time. If you break one, just buy a new one at Pep Boys or pay the price at Dodge. There are 10 sheet metal screws to be removed, 6 on top and 4 on the bottom. After the screws are out, start pulling outward and it should come off. This is the way that the GTS comes off and I think that the RT/10 is the same.

They are very expensive to replace, so just take it to a body shop for repair. There were some used ones for sale on the Parts For Sale list under Classified on the VCA home page, for around $1000 ea..



<FONT COLOR="#ff0000" SIZE="1" FACE="Verdana, Arial">This message has been edited by Jerry Scott[CO] on November 13, 2000 at 13:03</font>