Pics of Gen3 covers going onto a Gen2 On going......

[VIPER BAZ UK]

Started looking into the swap over...

Stock Gen3 covers

You must be registered for see images

Breather going into a filter chamber

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

Looks like i need to drill a hole in the end of the cover and on the inside filter chamber so the new breather hose goes all the way in like the stock one..

Also need to figure out how to mount the hoses down the right side of the engine and the plug wire clips....

You must be registered for see images

You must be registered for see images

 

[carl B]

Hi,

You gona get e'm done yellow first Baz??

Carl

 

[Hisserman]

Baz --

As I'm sure you've seen, here are the Gen III's installed on Steve Nelson's new Gen II bumblebee:

Also, here are some shots of Proracer's former car with the Gen III valve covers:

Proracer did both installations. PM him and I'm sure he can answer your questions.

 

[VIPER BAZ UK]

Many thanks for the pics..
I'm after the longer studs to hold down the covers so i can still clip the plug wires on as seen in Proracers car..

Had a few mails from Steve also..
Carl
Powdercoating will be the last thing befor final fitting

 

[STOUT 1]

Do gen III bolt right up to a gen II? What mods have to be done and whats all involved. They look really sharp!

 

[Hisserman]

No, they don't just bolt right up -- that's what Baz is on the track of -- the details!

 

[VIPER BAZ UK]

So far so good.....

You must be registered for see images

Looks like i will just get a threaded bar and cut my own bolts for the plug wires lock two nuts together halfway down so it still secures the valve cover.. and just buy longer bolts for the top of the valve covers...

 

[VIPER BAZ UK]

Re: Pics of Gen3 covers going onto a Gen2 On going......More parts!!

A few more pics..
Plus more bits going in/on

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images attach

You must be registered for see images

You must be registered for see images

 

[Hisserman]

Re: Pics of Gen3 covers going onto a Gen2 On going......More parts!!

That "bone stock" label will have to be changed soon . . .

 

[VIPER BAZ UK]

Re: Pics of Gen3 covers going onto a Gen2 On going......More parts!!

Studs made from threaded bar and the bungs to block old breather holes..

You must be registered for see images

Studs fitted

You must be registered for see images

And with plug wire clips in place

You must be registered for see images attach

 

[VIPER BAZ UK]

Re: Pics of Gen3 covers going onto a Gen2 On going......More parts!!

And theres more....

You must be registered for see images

You must be registered for see images

You must be registered for see images