Roe Supercharger, Throttle Bodies, and Elite Airbox For Sale

[2MANYTOYS]

I'm selling these and going to do some new mods to my car. The blower is the polished version 5lb. setup. Has appx. 1500 miles on it. The Blower cost new is $7,495.00, the 70mm throttle bodies cost $550.00 and the airbox designed for the roe blower cost $1,049.00. I'm selling it all for $6,800.00. That's more than $2,000 off buying this new. Anyone interested PM me or email me.

 

[J DAWG]

Great price and that would certainly top off my motor real nice.......too bad my wife is sitting right here. Hope your new project turns out good.

 

[99 R/T 10]

What are you working on there 2MANYTOYS? Guess you won't need my Pilots again, needing the drag radials!

 

[2MANYTOYS]

What are you working on there 2MANYTOYS? Guess you won't need my Pilots again, needing the drag radials!

 

[Cudaman]

Could one of your new toys be a new home for your family???

Cudaman

 

[Sean Roe]

That kit can be upgraded to run 6.5, 8 or 10 psi boost on a forged piston car with a $119 pulley and a shorter belt (10 psi pulley needs a shorter belt). It may need the bigger injectors if 2ManyToys has the blue top (40 lb) ones and a voltage booster for the fuel pump to run the higher boost ($429 injectors and $199 voltage booster).

At 8 psi on a stock forged piston motor (with exhaust), it would make about 620 RWHP and 640RWTQ. Put a set of heads on (about $2,800 with gaskets) and a cam ($400) with a little tuning and you could make more than 700 RWHP and 720 RWTQ (over 700 RWTQ at 3,000 RPM) with ease.

Regards,
Sean

 

[Shelby3]

That kit can be upgraded to run 6.5, 8 or 10 psi boost on a forged piston car with a $119 pulley and a shorter belt (10 psi pulley needs a shorter belt). It may need the bigger injectors if 2ManyToys has the blue top (40 lb) ones and a voltage booster for the fuel pump to run the higher boost ($429 injectors and $199 voltage booster).

At 8 psi on a stock forged piston motor (with exhaust), it would make about 620 RWHP and 640RWTQ. Put a set of heads on (about $2,800 with gaskets) and a cam ($400) with a little tuning and you could make more than 700 RWHP and 720 RWTQ (over 700 RWTQ at 3,000 RPM) with ease.

Regards,
Sean

Sean, What does it take to be able to run a 10 lb pulley?

 

[2MANYTOYS]

Shelby3 check your PM.

 

[jimandela]

2manytoys,
bummer on selling the parts, keep us posted on your new mods.

 

[2MANYTOYS]

The whole setup has been sold. Thanks to everyone for your interest.

 

[Shelby3]

The whole setup has been sold. Thanks to everyone for your interest.

 

[HARDVIPER]

If he backs out of the deal please let me know.
Thanks

 

[Shelby3]

If he backs out of the deal please let me know.
Thanks

He isn't going to back out. Move on to plan "B".

 

[2MANYTOYS]

If he backs out of the deal please let me know.
Thanks

He isn't going to back out. Move on to plan "B".

LOL!!!!

 

[Larry Macedo]

Congrats on the sale of your system to Mr. Hirsch, Brian. Give me a buzz this weekend when you get a moment please.

 

[Kurt 97 GTS]

Brian,

Congrats!!! BTW, I hope I'm not crazy for passing!!