Recent content by Ramtuff
-
Broken fan - What Now
So, go electric, what line and fitting from the pump are you going to use to supply the power steering? Not getting easier is it………..- Ramtuff
- Post #68
- Forum: SRT10 and SRT10 Coupe Discussions
-
Rear Tire Wear?
That and or needs new toe links, ball joints, bearings etc…..- Ramtuff
- Post #3
- Forum: SRT10 and SRT10 Coupe Discussions
-
ROE - Crank Pin kit - detailed pics of what it really does.
With a bit size of .249 and a pin size of .257 I’m going out on a limb and say roll pins…..- Ramtuff
- Post #21
- Forum: General Viper Discussion
-
-
05 rods not fit 03 block
Adds 2k but you have fully forged lower end. K1 rods and mahle forged pistons.- Ramtuff
- Post #11
- Forum: General Viper Discussion
-
Can we verify sequence of 1992 Vipers?
Vin#s do not correlate to build sequence. When there is an order for a vehicle (this is simplified) it gets a vin then the scheduler decides when the car gets built and receives a sequence # and is built in that order. Cars can be held back if they don’t have certain options available or they...- Ramtuff
- Post #2
- Forum: RT/10 and GTS Discussions
-
Clutch or something else??
The exhaust expands 1/2 to 3/4” when hot. You should put the outlet about 1/4” from the front of the opening when cold. You will melt your wheel well liner from the hot exhaust With spirited driving. You may have to tack weld the joints to prevent it slipping.- Ramtuff
- Post #4
- Forum: SRT10 and SRT10 Coupe Discussions
-
Deep in the Engine
He has the whole timing procedure posted for the gen 4 from a nice gentleman on Facebook.- Ramtuff
- Post #5
- Forum: General Viper Discussion
-
Vin Sequence
Scheduler assigns the cars to be built, an order can have a vin but depending on options it may be built later than newer orders. The sequence number tracks the car around the plant in order. Generally lower vin numbers are built early but they do not determine build order.- Ramtuff
- Post #8
- Forum: Generation V Discussions / SRT Coupe, GTS, GTC, AC
-
Vin Sequence
Cars are built by sequence number not by vin numbers.- Ramtuff
- Post #4
- Forum: Generation V Discussions / SRT Coupe, GTS, GTC, AC
-
Gen 3 & 4 Double DIN Head Unit DIY
Your write ups are nothing short of epic, I have a hard enough time just doing projects none the less documenting and editing. nice job as always!- Ramtuff
- Post #10
- Forum: SRT10 and SRT10 Coupe Discussions
-
Rubber Padding ?? on Front Bumper Inside Cowl ??
Even OEM’s use things such as that foam between parts to stop BSR (buzz, squeak, and rattle). My guess is that the last shop that worked on it put it there for that purpose.- Ramtuff
- Post #5
- Forum: RT/10 and GTS Discussions
