Search results

  1. G

    Loose harmonic balancer AND crank pulley

    The duramaxs shear the small pin on the crank.
  2. G

    Another crank no start thread but with a twist

    pull down design. Read up on it. Plus did you check what I posted? Don't bother with the gas pedal to the floor. Vehicles are engineered to have a 'flood clear' mode that cuts fuel on cranking when activated by WOT on crank.
  3. G

    Another crank no start thread but with a twist

    You can check the ground pin on the MAP or throttle position sensor as they are easily accessible as they all tie to the same pin on the PCM as the ckp and cmp. The ground signal for all of them is on the same circuit. It is NOT chassis ground but PCM ground. There is a big difference hence...
  4. G

    Another crank no start thread but with a twist

    In reference to the sensors CKP = Crank position CMP = Cam position
  5. G

    Coolant question

    15.2L or 16qts.
  6. G

    Another crank no start thread but with a twist

    Disconnect plug and retest plug. Back probe it too connected.
  7. G

    Upsize alternator wiring?

    Just making people who stumble on the thread to be aware the PCM has the voltage regulator. There is a procedure in the SM about testing it at the output post.
  8. G

    Upsize alternator wiring?

    Remember the voltage regulator is built into the PCM. The alternator/ generator doesn't have a regulator like other non Chrysler cars.
  9. G

    5245322 PCV Grommet NLA / Substitute

    Calling @GTS Dean calling @GTS Dean . Search on here and alley for Dean's threads.
  10. G

    Dave's Big Brake Upgrade

    I bought a set of SS calipers a couple years ago. Need to go and talk to the dude for the brackets
  11. G

    HELP HELP HELP!!!

    There is an additive for that Bent carrot.
  12. G

    Pre-Purchase Inspection Recommendations in Northern Michigan

    You may have to fly someone in if you that worried.
  13. G

    GEN 1 Big Brake Upgrade

    See the alley reply
  14. G

    Question about coolant change on my 1997 GTS with 16k miles

    Fluids are cheap. Change them. All are easy to do except for the clutch unless the bleeder turns easily. Mine did not and I wasn't going to force it even though I tried. I just emptied the reservoir then stuck a small od hose as far as I could down the line and stucked the rest out...
  15. G

    HELP HELP HELP!!!

    @Bigsnow @Viper Specialty is still waiting for his sammich.
  16. G

    Gen 2 Replacement Battery

    Are you guys communicating in some g a y code all of a sudden?
  17. G

    Gen2 GTS hood alarm switch location?

    Wrong sub forum.
  18. G

    Dave's Big Brake Upgrade

    @synergyperf you need to tell us what year calipers you are going to run
  19. G

    My viper conundrum

    Sell it. Use the money to get cooking lessons, a perm for your manbun and let your boyfriend drive you around.
  20. G

    A few Gen 2 items for sale

    @Dan Cragin Intetested in the 3.55 for now.
  21. G

    HELP HELP HELP!!!

    In other words, stop replacing parts and make me a sammich.
  22. G

    Selling 97 RT/10 to get a Lambo...

    So you looking for a set of used rears?
  23. G

    94 insurance cost for a young guy

    You said 4 cars in the family, but how many drivers in the family? If <4 then you are a primary on one of the cars and that would be on the most expensive to replace one.
  24. G

    PM's

    That picture you sent me, well let's said I don't swing that way.
  25. G

    Help needed / Wiring Diagram for 1998 Viper GTS Map Sensor / P1296

    If rebuild why stock? Was values changed in the tune?

Latest posts

Members online

No members online now.
Total: 1,445 (members: 0, guests: 1,445)

Forum statistics

Threads
154,528
Posts
1,691,590
Members
19,290
Latest member
CfloGTS

Share this page

Top