Thanks Tom
I'm assuming that based on the various size Crush washers I found online there is an "exact" size which "should" be used. Trying to use a thicker washer will result in the banjo bolt not grabbing many threads in the rear calipers. Fortunately my local Dodge Dealer had 7 in stock at...
fastenal has them in stock at most locations along with several other odds and ends for the viper.
Automotive Specific Fasteners | Fastenal
I believe its a ford part and you can also get the dorman version from any help section. I went back in with rivet nuts after the 3rd time I removed my...
I figured out all my questions and have since installed the new calipers and stainless lines. My question should have read pipe compound/dope instead of thread locker. The OEM bleeders had nothing on them and all the aftermarket options that I looked into had compound on the threads.
Installing a set of powder coated calipers and SS line. What type of thread locker if any should be used on the bleeder valves. As pointed out in PM not really thread lock. I only ask because it appears the speed bleeders have some sort of red compound on them when viewed online. These are...
don't have any exp with a boars hair brush. I still use Superior bilt grout sponges from home depot and Ive had excellent luck with them. For $70 I could almost buy 50 sponges. I rotate them from finish to tire/wheel well when they start to look worn.
hes 22 obviously he stole the car.
That car if memory serves me was that low when I saw it at the Texas mile in October so I don't believe the stance is P shopped. I could be wrong, it happens at least once a year.
Iforged full polish here as well. I thoroughly spray the wheels during wash and only touch them with the same type of sponge and MF I use on my paint. Once a month I break out the mothers billet polish. I use a latex gloved finger to wipe and polish until black. I then use brake parts...
Is the process listed above for a 93? Lets just say id rather have my thumb smashed with a hammer than do this again. Its almost as easy as passing a stone.
http://forums.viperclub.org/rt-10-gts-discussions/627458-how-do-you-remove-radiator-fans-early-gen-i.html
Thanks Mark I was hoping you would chime in.
My estimate from the insurance company is $1300. The quarter panel has a crack running from front to back to back caused be a front fascia and the paint on the rear bumper cover is spider webbed along with a gouge about 10 inches long. Id rather...
Thanks Dave
The shop that I took the car to is very familiar with vipers, the owner has two of them. They have never done a QP and their RI time is higher than than my insurance appraisal, obviously the appraiser works for the insurance company. I simply want to make sure that Im as accurate...
For those who have done this I'm looking for a little assistance. My insurance company is quoting 15 hours labor for RI on a passengers side quarter panel and 6 hours paint. To get the QP off both rear wheels, the battery cover and wheel liner of the passenger side have to be removed. Is 15...
Actually the reason this discussion probably came about is my fault so blame me. I was discussing the sneaky pete logo with Jason last week and talking about how it needs a makeover.
My car turned to crap on 11-20 when another viper owner decided to swerve into my lane and hit me, cracking...
The sneaky Pete logo was so iconic that it was changed? Freaking metal bands that cut all their hair off just because, oh wait there is a reason for it.
Why would anyone buy a viper built with no stripes then add them. Hell why would anyone put a power adder on a car that was "perfect" as...
I presume you are stating 1st hand facts not word round the campfire. I invite you over to see my hood and the clear that is burnt in a place about 1'x1". Noob mistake using a 6.5in yellow pad and an aggressive compound via porter cable. I should re state burn CC, don't know about paint as I...
Autopia - Autopia Home
Several companies use the same re branded product with different fragrances in them. I can tell you first hand that pinnacle works well, I have used both Menzerna and pinnacle to remove fine swirls on several cars. Read the boards with an understanding that all products...
I think its safe to say that unless Matt has a tail that he uses to hold his camera, one hand was on the wheel and the other shifting. That would mean he had a camera person filming. Not to take anything away from people with tails, Id kill to have one.
That didn't look like a public street...
I had my fascia off last year for a re paint and it went back on with no issues. I also had the hood off later that year to do the timing chain cover gasket. It was removed from the arms which were left in place. All lined up well but lately I have noticed more of a gap above my passenger HL...
Great job as usual Dave, I use the heck out of my mighty vac. Maybe the VCA can host the pics vs users side. I have noticed that a few of the pic in the illustrated section are gone, kinda pointless to have a walk through with no pics.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.