Search results

  1. Z

    Houston C&C pics

    Like the pics, NICE!!! Still looks warm out too!
  2. Z

    Annual HPJ Toys 4 Tots

    I am as square as a wooden block! I tried and tried man, the headers were a bust because I could tighten the mid-header connection flanges by myself, then worked on that cold pavement and got sick. I was in bed all friday after work and most of Saturday. Wish I could have been there! Do you guys...
  3. Z

    Annual HPJ Toys 4 Tots

    I might do that, I know that I planned on working on the car all Saturday to knock it out. Who knows, as long as it keeps going the way it's going I might actually finish. I have to put on the headers, exhaust sill vents, put on the trans mount, order 3 inch piping, put the new wires on, then...
  4. Z

    Siezed Up Motor Mount Nuts, HELP!

    Went to TSC, but didn't get the exact hex nut with the built in washer. I wound up getting some grade 8 washers and nuts that should work exactly the same. I also upgraded to all grade 8 steel hardware, which is not only stronger, but looks really sweet too!
  5. Z

    Fayetteville/Hope Mills Cars and Coffee

    Good Pictures!
  6. Z

    Annual HPJ Toys 4 Tots

    Really Really wanted to go to this, but know that my car will take longer than this weekend; be sure to post some good pics!
  7. Z

    Siezed Up Motor Mount Nuts, HELP!

    I'll give it a try!
  8. Z

    Siezed Up Motor Mount Nuts, HELP!

    I finally got the mounts out! The passenger side eventually came loose with using the PB penetrating spray, the driver side however, took forever and I kept soaking it with PB; it eventually sheared off. Between the PB and Impact gun, they really pulled through. My motor mounts that I removed...
  9. Z

    Siezed Up Motor Mount Nuts, HELP!

    Well, off to Sears I go, wish me luck tonight... -Penetraging spray -Torque Wrench -Blow Torch -More Rachet/Sockett extensions (Replacing the broken ones) -Nut Breaker, Both Sizes -Possibly 3/4 inch drive Ratchet Setup -CRC Brand QD Electronic Cleaner Spray (To clean O2 Sensors while...
  10. Z

    Siezed Up Motor Mount Nuts, HELP!

    My goal on this car is to do as close to 100% of the maintenance/upgrades by myself. So far by doing this I have become very intimate with the underside of my car and in the sides of the engine compartments. But, I know exactly what you mean. Thanks for the heads up, I definately won't use...
  11. Z

    Siezed Up Motor Mount Nuts, HELP!

    I read that thread too, but felt helpless when they still wouldn't come off. I might just go the way of the nut cracker to get tops and bottoms off while on the car. Anyway I look at it I am dreading messing with them again today. I am doing this by myself and on Jack Stands; however I am...
  12. Z

    What is your Viper gettin for Christmas

    My GTS is getting PREMIUM GAS!!!
  13. Z

    Siezed Up Motor Mount Nuts, HELP!

    I'll definately get another penitrating spray, if I see one of those I'll pick it up!
  14. Z

    Siezed Up Motor Mount Nuts, HELP!

    I am definately going to pick one of the up too. I'll use it right before I will resort to grinding it off. I thought of that, I'll have to wipe the stuff off really good. I'll probably hit it with some brake part cleaner to break the oil down and then let it dry before I start heating it...
  15. Z

    Siezed Up Motor Mount Nuts, HELP!

    I'll definately get some PB after work today. Awesome idea with the torch, I'll get one of those as well and light her up! Tried that too, it just stayed the same...
  16. Z

    Siezed Up Motor Mount Nuts, HELP!

    Any particular types of penitrating oil works better? I have used WD-40 for the past 3 days. I will definately try the hammer later today(With Pleasure)!
  17. Z

    Siezed Up Motor Mount Nuts, HELP!

    I am in the process of switching out my motor mounts while putting headers on my car (99 GTS). I have all access to the mounts, however the nuts are completely siezed up on it. I have tried penetrating spray, the longest breaker bar known to man(it will round off my extensions), my impact gun...
  18. Z

    The first Viper you ever saw

    96/97 B/W, outside of Logan's SteakHouse in TN; wanted one ever since I was in High School.....
  19. Z

    My custom splitters finished...pics...

    Good Question! I think I want to gear my car up for the standing mile... Reinforcement is definately important to me as well. Can you post any more pics/videos of the stuff on the car or post some more info on the whole setup. Also, is this getup painted or powdercoated?
  20. Z

    Write-ups on Gen 2 Header Installs???

    I hear ya man, lol! I was changing the the oil out on an old s-10 one time and did the screw driver remove way (punch a hole through it and turn because the previous owner put the filter on way way way to tight; I touched the starter and a ground a couple times and got lots of sparks, so when I...
  21. Z

    Write-ups on Gen 2 Header Installs???

    I'll do the search, thanks again!
  22. Z

    Write-ups on Gen 2 Header Installs???

    Edelbrock, I think the torque specs came in the directions.
  23. Z

    Write-ups on Gen 2 Header Installs???

    Thanks again man! I am just wanting to see if I have to remove the starter like the directions say that came with the headers (Edelbrock). It's nice to see the write up before you really hammer one out just to save any time that might get wasted from a lack of knowledge.
  24. Z

    Write-ups on Gen 2 Header Installs???

    Sorry guys, I have searched and searched, but has anyone done a how to write up on installing a set of headers on a Gen 2?
  25. Z

    LED tailight questions

    Where are you stationed at StateSide? I am at Seymour Johnson.

Latest posts

Members online

Total: 697 (members: 2, guests: 695)

Forum statistics

Threads
153,202
Posts
1,681,953
Members
17,703
Latest member
shibbydude

Share this page

Top