Search results

  1. C

    Short throw question.

    +1 for me. I have the same knob as them, plus I installed a B&M shifter and I LOVE IT!!! I also have a brand new transmission so the NEW shifter and the NEW transmission are both still kinda tight so don't try to drag race anybody by quick shifting. You have to almost wait for the synchros to...
  2. C

    Oil pressure - is 70-80psi normal?

    Okay, I'm back home from Saudi now and had a chance to investigate this a little further. The psi does go down after it gets hot and the engine is at idle. Usually in the 40-50 psi range. But any throttle advance and it pegs out. So its apparently working properly now. I guess the real...
  3. C

    Oil pressure - is 70-80psi normal?

    I just had a sizzle going on between my ears!;) Would me changing the exhaust to high flows have anything to do with an increase in my psi? I can't say for sure if it ran lower before, but now I'm wondering. A back pressure issue maybe? Hell, that sizzle is starting to hurt now and I think I...
  4. C

    Oil pressure - is 70-80psi normal?

    Sooo....other than maybe a sensor going out I shouldn't be worried about anything? Is that what I'm hearing? My gauge runs constantly in the 70-80 range. I see very little deviation when hot or when at speed vs idle. I know there could be many reasons, but if you are seeing a drop to as low...
  5. C

    Oil pressure - is 70-80psi normal?

    I have been noticing lately that my oil pressure is staying almost maxed out on the gauge. It fluctuates a little between whoa and go, but even after it warms up it still hangs in the high range. Is this normal? I never paid enough attention to it before to know if it has changed. It is...
  6. C

    Exended work from home...what to do with the Viper?

    I may be leaving soon to go overseas on a 3 year work assignment in Abu Dhabi and wondering what I need to do with my car while I'm gone. I don't want to leave it in my garage for that long without it being ran periodically. Plus I live in the country and have to say there would be a rat...
  7. C

    Headlight buckets

    Thanks Tom. I just replied. It has nothing to do with being able to afford them. Its the principle that it is ridiculous to charge that much for a piece of plastic. Exclusivity is for people who have too much money to give to people that take them for granted. Caviar, Monet's, and memberships...
  8. C

    Headlight buckets

    Anybody know of a current good source for Gen 3 replacement headlight lenses/assemblies that aren't trying to rape you? Mine are heat cracked pretty bad and I tried one of those repair kits with the polish but it didn't help. New ones are like $600 and up each. Heck, I even saw some on a...
  9. C

    Sideways through a ditch now car pulls hard right

    Finally a stroke of good luck!! It turned out all of you were right to an extent. It was only an alignment issue with no major damage, including no cracks in the a-arms. The tech said it was bad out though. He even had to start it in on an angle to get it on the alignment rack because the...
  10. C

    Sideways through a ditch now car pulls hard right

    Now THAT is the comment I was waiting for!!! I knew it was coming! Always appreciate your humor Free...lol Thanks guys. Looks like it may be Saturday before I can get it to the shop, but I will reply as soon as I find out the damage. Like Broom said, expect the damage to be double what you...
  11. C

    Sideways through a ditch now car pulls hard right

    Dodged a deer last Saturday night, slid sideways through a ditch and back up onto the road without hitting anything, and now I'm afraid to know how much damage was done. The deer darted out, but I was too close to stop in time, so I thought I could hit the shoulder and beat it before it got to...
  12. C

    Car almost caught fire!!

    Not sure how much more it would have taken to light, so I still say yeah. A LOT of smoke. Not sure what answer you're looking for....
  13. C

    Car almost caught fire!!

    I took the sill off today. It was a plastic spacer on the bottom of the insulation jacket that melted. So a couple questions. Is it critical to not have ANY holes in the insulation? I have a couple small roughly 1/4" holes where clamp bolts cut through at some point. 2nd, would wrapping the...
  14. C

    Car almost caught fire!!

    Well there was smoke. And where there's smoke there's usually fire. I think had I not had a hose handy to cool it off it might have lit. Plastic and paint burns. I got rid of the factory cats and added single high flows to each side. Crossover is gone too. Are you saying run no cats at all...
  15. C

    Car almost caught fire!!

    I was out driving the other day and got in it pretty hard. When I got home and drove into my garage I noticed a weird smell. Not oil and not clutch, just weird. I raised the hood and could smell it more from the passenger side of the engine bay. Then I looked down and noticed smoke coming...
  16. C

    Need Viper mechanic/specialist in the Baton Rouge/Hammond area

    In that case, Chris at Salsbury's. He does all my technical work and is also very good on diesels if you have one. He may even arrange something outside of work(shhh!!) so you don't have to pay the higher dealer costs. But you will have to work that out with him once you meet him. I used him...
  17. C

    Need Viper mechanic/specialist in the Baton Rouge/Hammond area

    I hear there is a speed shop in Metairie or somewhere around the airport that specializes in Dodge products. What are you looking to get done? If it's minor fixes I'm up in Greensburg. Wouldn't mind giving you a hand, depending on what it is.
  18. C

    Noises in steering and clutch

    Yeah, but with the known hose failure problems, now you don't have the option of driving the car to a safer location with 'manual steering' because the engine is overheating as well since the steering AND the fan is out. I'm not saying the hyd fan in itself is a bad idea...but tying it in to...
  19. C

    Noises in steering and clutch

    I checked out everything under the hood this weekend. I definitely have the hydraulic fan, which still amazes me that engineering had a brain fart that day. Has anybody ever heard of upgrading that to block off the hyd lines to the fan and replacing it with an electric unit? Seems like that...
  20. C

    Noises in steering and clutch

    Thanks guys! I will look into it.
  21. C

    Noises in steering and clutch

    BTW, just so im more knowledgeable going in, what is the purpose of the cooling module recall? And do you have the recall number? So they dont try to fugaboo me when I take it in (that's a word in south La...look it up)!
  22. C

    Noises in steering and clutch

    I knew the pump served double duty. Being the TOB was hydrauluc I assumed that was the '2nd' duty. So the TOB has a built in slave cylinder? Or is there a clutch MC, slave, and hydraulic unit on the TOB working all together?? Usually the slave is mounted remote from the TOB. Anyway, I will...
  23. C

    Noises in steering and clutch

    From a previous post I mentioned I had a noise in my steering. When turning (usually only when the car is cold) there is a 'catch' and a 'bump' in the steering wheel and you can hear a semi-whine from the power steering lines when it happens. Almost like there is air in the lines. Now I am...
  24. C

    SCT tuner or upgraded PCM

    Thanks guys! That does clear it up. The confusion I had was about the pre-installed tune. I was thinking it would be the same as my older units that came with a generic tune, but now understand whats going on. Again, I was just curious. A member, mentor, and my new hero has been telling me to...
  25. C

    SCT tuner or upgraded PCM

    So I keep coming back to this topic. I'm currently considering the SCT but still not quite sure how it works. First of all, I like the idea of being able to make tuning upgrades as I add stuff to my car (cam/exhaust/intake/heads/etc). As each step is done it would benefit from being 'added'...

Latest posts

Members online

Total: 789 (members: 7, guests: 782)

Forum statistics

Threads
153,198
Posts
1,681,912
Members
17,696
Latest member
Viper123456

Share this page

Top