orlandov10
Enthusiast
- Joined
- Aug 2, 2005
- Posts
- 173
- Reaction score
- 0
I just wanted to see what you guys thought of my numbers, I was running stock tires that are beginning to hit the wear bars, I just purchased my Viper a few weeks ago, the previous owner installed the Roe S/C himself but never tuned the car, its been running a Sean Roe 6 degree retard base map on blue top injectors at 6.5psi, I have an appointment to drop the car off at Roe Racing this Wednesday for a 10 lb pully, water/****, and possibly larger fuel injectors/resistor/voltage booster. I'm going to try and tune it in with the blue tops but Sean tells me no one has ever tried to run 10psi with water / **** and blue tops before so we'll be blazing new ground. I would think the **** should compensate for the additional 3.5 psi. I also have headers (don't know who makes them) Borla 3" exhaust, the VEC II was running a 6 degree base map, its never been tuned for my car, here are my 2 best runs.
60' 2.134
330 5.501
1/8 8.163
MPH 91.75
1000 10.404
1/4 12.23
MPH 123.50
60' 1.976
330 5.205
1/8 7.770
MPH 97.25
1000 9.994
1/4 11.836
MPH 120.85
Run #2 I ran a much better E.T. and I was 6MPH quicker by the 1/8th mile before I screwed up and missed 3rd gear, my MPH dropped after I missed 3rd, I went to put it into 3rd and wound up grinding the gear (OUCH!!) I then put it back into 3rd and it went in just fine, I think if I would have had a clean run on my 11.8 time I could have run 11.7 @ 126 judging by my 1/8 MPH. Do you think this is a normal ET / MPH for a 6.5psi car? I was told this car made 430rwhp STOCK! I know the car is running pig rich so I hope to be running much stronger next week after my visit to Sean. Also does anyone know who makes these headers? They are individual runners, 12 pieces in all, 10 runners and two collectors. Oh and I reside in Orlando, Florida.. It was hot and humid out, about 90 degrees or so.
60' 2.134
330 5.501
1/8 8.163
MPH 91.75
1000 10.404
1/4 12.23
MPH 123.50
60' 1.976
330 5.205
1/8 7.770
MPH 97.25
1000 9.994
1/4 11.836
MPH 120.85
Run #2 I ran a much better E.T. and I was 6MPH quicker by the 1/8th mile before I screwed up and missed 3rd gear, my MPH dropped after I missed 3rd, I went to put it into 3rd and wound up grinding the gear (OUCH!!) I then put it back into 3rd and it went in just fine, I think if I would have had a clean run on my 11.8 time I could have run 11.7 @ 126 judging by my 1/8 MPH. Do you think this is a normal ET / MPH for a 6.5psi car? I was told this car made 430rwhp STOCK! I know the car is running pig rich so I hope to be running much stronger next week after my visit to Sean. Also does anyone know who makes these headers? They are individual runners, 12 pieces in all, 10 runners and two collectors. Oh and I reside in Orlando, Florida.. It was hot and humid out, about 90 degrees or so.