Here you go. As noted, take your time...I did mine in two evenings. One to remove the sills and the exhaust, and the other to do the install. The worst part is putting the sills back on a half dozen times before you are satisfied with the fit of each one. I'm a bit of a perfectionist in this area, and even though you can't see both sides at the same time, I wanted the tips in exactly the same place side to side. No other way to do it but to get a side the way you want it, bolt it all down, and then do the same repeatedly to the other side. It definitely takes two people for this operation. Note the tape I used to protect the car - not a scratch (whew!)
One issue I had with my '08 was that the locating pin (second picture) did not line up on the passenger exhaust. I called Corsa, and the techs were fantastic. I send digital pics and they confirmed that something was up (and it wasn't my install), and in the end recommended making the locating notch a bit larger on the Corsa, which I did. Of course, that meant more play in it, so it was a bit more difficult to line up that side.
Good luck!