Exhaust metal trim - GTS

[Mark Red GTS Cooper]

A while ago someone posted they made the metal trim piece for the GTS, along with the metal trim was the cutout piece that had the Viper head on it.

Who was it?

Thanks in advance,
Mark

 

[J DAWG]

Can't remember the guys name, but I bought one from him and am not using it.

You can have it for what I payed. Still in the package with the cutout.


John

 

[Mark Red GTS Cooper]

John,

Why are you not using it? Do you have a pic, I want to see how thick the top part is.

mark

 

[J DAWG]

My wife won't let me put it on the car.


I will get some diminsions for you.

 

[Shelby3]

You must be registered for see images

I had a batch of these made out of 16ga. polished stainless steel. They fit the rear opening exactly while others do not. I sold the last one's to a friend, if you're interested I'll check with him and see if he has any left.

 

[J DAWG]

Mark


It looks like the one above and it also has the "Viper" cutout in a plate as well.


There is a 1 inch edge that makes the border and the opening is 7 3/4 by 9 3/4 inside diameter.


There are 16 holes with stainless stell screws and nuts.


John

 

[Mark Red GTS Cooper]

John,,

Send me a pm with the price and contact info,

Thanks,
Mark

 

[zen garage]

Anyone have one of these without the center piece cutout. I am thinking of fitting this to cover the exhaust hole from my side conversion.
Its either going to look real good, or very ghetto but I would like to give it a try.

 

[J DAWG]

Mark


for some reason my pc won't let me send a pm.


Call me whenever 601-918-6083 if you want them.


John

 

[TomMiriViper]

How much are they and can you buy them unpolished?

 

[Simms]

Mine is a different version. It came unpolished. I sanded it and polished it to get the shine it has now.

 

[radta7]

I want a polished one. Who exactly has these? Let me know, I am interested. I assume you take the stock bolts off, but do you need to drill new holes for the new screws??

Thanks in advance,

 

[Shelby3]

You must be registered for see images

I had a batch of these made out of 16ga. polished stainless steel. They fit the rear opening exactly while others do not. I sold the last one's to a friend, if you're interested I'll check with him and see if he has any left.

My friend has three of these left. If anyone's interested e-mail me and I'll put you in touch with him, he is not registered on this forum. He gets $99 delivered in the US.

 

[97fatboy]

There are some in the classifieds.