All, purchased a Dave's SRT front tow bar from Parts Rack last year ($170) and installed it on my 09 ACR. Hoped, I would never need it, but needed a tow at VIR this summer. The safety crew left too much slack in the strap and yanked the car pretty good. Didn't notice at the time, but when I got home and tried to open the front hood, it would not open. With a flashlight, I noticed the front crossmember the towbar was mounted on (which also holds the door latch and oil cooler) was bowed out about 2-3 inches, torqueing the hood latch shut. Off to the body shop. Turns out that crossmember is tubular and bends fairly easily. The guys (Safford Dodge, DC area, outstanding), were going to try and heat the crossmember back into place, as the new front suspension unit is $22K. This would of course weaken the structure and I could never use that tow point again. Well, they actually cut out the hollow piece and welded in a solid piece (note to Dodge) for the same money ($2600), and even reattached the tow hook (now oval, not round). It feels rock solid with no change in driveability. I am only posting this here, because I attempted to put this review on Jon B.'s site THREE times, and each time it magically disappeared and I wanted to get out the word somehow. Good product, just be VERY careful with safety crews or tow trucks.