D
DAMN YANKEE
Guest
Ok, so I've been spoiled with some of the best spray nozzles in the world. Growing up in "The Armory State" means I grew up working in and around all the great machinists of early day Connecticut manufacturing. We were...once...the wealthiest most industrialized state in the Union. I grew up with the very finest solid brass, squeeze trigger, fully adjustable, huge water volume, hose nozzles and always took them home to use them for the most important hydro event.....washing your car.
If your taking the time to twist your nozzles on and off every time you use it, forget that! You want to find the right pattern and KEEP it.
Those rubber covered clunkers that are all the rage from Groits, etc. are bricks!
If your dealing with *** metal, plastic, zinc.......naaaaah! Solid brass only.
If you can't lock it on........naaaaah!
If your not putting through a minimum of 3.5 gallons/minute at 55 pounds of pressure......naaah!
If your not able to do at least a gallon on a +75 degree spray spread.....naaaah! Rinse heaven!
If you can't throw a column of water straight up in the air a minimum of 28' at the same pressures and clean your windows....naaah!
If you can't dust your roses with a spray so fine it generates rainbows and then adjust it to knock off the worst mud......naaaah!
If you can't rebuild it and pass it down to your kids........naaaah!
If none of this matters to you....why the hell are you still reading this thread?
If it does......
Order the following and have the very best!
a. One (1) 4688 Trigger valve with lock.
b. One (1) 4754 Sure grip handle
c. One (1) 5780-AX60 Adjustable spray tip
and put aside a AB4588 rebuild kit for your kids.
TEEJET Spray Products
Find your dealer here
TeeJet - Authorized TeeJet Distributor
Anal Hydro Engineers...look here
http://www.teejet.com/media/326977/5780.pdf
The finest made....put 'em away as they w-a-l-k away all by themselves!
Buy them while they are still heirloom quality!
If your taking the time to twist your nozzles on and off every time you use it, forget that! You want to find the right pattern and KEEP it.
Those rubber covered clunkers that are all the rage from Groits, etc. are bricks!
If your dealing with *** metal, plastic, zinc.......naaaaah! Solid brass only.
If you can't lock it on........naaaaah!
If your not putting through a minimum of 3.5 gallons/minute at 55 pounds of pressure......naaah!
If your not able to do at least a gallon on a +75 degree spray spread.....naaaah! Rinse heaven!
If you can't throw a column of water straight up in the air a minimum of 28' at the same pressures and clean your windows....naaah!
If you can't dust your roses with a spray so fine it generates rainbows and then adjust it to knock off the worst mud......naaaah!
If you can't rebuild it and pass it down to your kids........naaaah!
If none of this matters to you....why the hell are you still reading this thread?
If it does......
Order the following and have the very best!
a. One (1) 4688 Trigger valve with lock.
b. One (1) 4754 Sure grip handle
c. One (1) 5780-AX60 Adjustable spray tip
and put aside a AB4588 rebuild kit for your kids.
TEEJET Spray Products
Find your dealer here
TeeJet - Authorized TeeJet Distributor
Anal Hydro Engineers...look here
http://www.teejet.com/media/326977/5780.pdf
The finest made....put 'em away as they w-a-l-k away all by themselves!
Buy them while they are still heirloom quality!
You must be registered for see images