Wheel fitment question GenII to GenIII

[DMan]

Anyone know if iForged rims from a GENII would fit my 03 GENIII? Thnx.

 

[dave6666]

What SIZE wheels?

Bolt pattern will in any case.

 

[MTGTS]

I don't believe the rears will clear your brakes unless they already had a bbk on their gen 2

 

[DMan]

Oh, yea giving the size might help, duh. 18x10, 19x13 - front/rear. They're iForged 3 piece.

 

[dave6666]

So you have SRT sizing already. Should be OK then. If you'd of had 18's on the rear then that's a problem with the SRT brakes.

 

[Brandon@DC Performance]

Do you know the offset of the wheels? If so, I can double check to make sure for you!

 

[mjorgensen Woodhouse]

Unless they were built for a Gen3 they will not. The Gen2 wheels have a different offset. The Gen3 wheel will fit a Gen2 but not the other way around.

 

[treesnake]

If you go to DAVES BIG BRAKES OLD website, (see below) he has a template you can print, cut out and place in the wheel to see if 18 in. wheels will fit over SRT calipers.

Gen 2 guys use this template when upgrading gen 2 brakes to SRT calipers to check wheel clearance.

This is from DBB's website;

Caliper to wheel clearance

You must be registered for see images

"A" is the caliper to wheel clearance needed 1.4" min
"C" is 7.75" arc for SRT Calipers
"C" is 6.75" arc for 13" Rotors &Calipers

​

 

[chimazo]

They should fit fine as long as it isn't a set with the 5" rear lip. You might need to relocate the parking brake, though.