Based on the live timing, PMUM takes 1st at the World Challenge at Laguna Seca. Absolutely great showing against the factory teams and their pro drivers. Congratulations !!!!!
Re: Why Vipers don\'t handle well?
The problem is the definition of handling. Some of the magazine editors look at handling as the way the car feels, how much feedback it gives you, how progressive or abrupt the transitions are, etc. A lot of them also can't drive so they most times will pick a...
Re: Northern California-AIR BOX CLIPS needed - can\'t slither without em
I got some work on the car scheduled this Wed. I forgot what part was supposed to be replaced but I got a check engine light come on and the codes pointed to that part. It was not the O2 sensor though.
Last time I saw...
Re: Northern California-AIR BOX CLIPS needed - can\'t slither without em
Got 1 or 2 clips. Email me and let me know when you want to get it. I'm in San Ramon.
Ken, I tow my viper/kwikload with a Dakota Quad Cab 4wd 5.9 with the tow package (3.89 rear). At the heaviest, I've had 1 passenger and maybe 300 lbs. of stuff in the bed. No problems going through the Shasta and Siskiyous mountain range from Northern Ca to Portland OR. I was told that the long...
How do the Kumhos compare to the Cups and the Hoosiers ? They have a treadwear rating of 50. From that you would assume they would slot between the Hoosiers and the Cups. My track wheels are 17" and I don't think Michelin has the sizes for those wheels.
I have many excuses :smirk:
I just took Monday off a couple of weeks ago for the NorCaL Racing Club and can't really do that too often. Wife has vacation plans and I'm thinking of going to Portland again to join the Oregon VCA for their track event so I need to save my vacation days.Seems...
Agree with SoCal Rebell. My additions:
1. Why does the Tech think the rotors need to be replaced? Assuming the same type of use then the longevity will be the same for the same type of mettalurgy, cooling, thickness of rotor that you will use as a replacement. Improve those 3 and longevity also...
www.lecircuit.com is the website for Mont-Tremblant just north of Montreal. Call them and find out if there are any car clubs that use it and maybe you can joing them too. Mont-Tremblant also has the Jim Russell driving school.
Janni, congratulations to the team and thank you for the write up. Seems like there should have been more viperheads supporting your valiant effort but maybe I missed something in the write up.
I was trying to figure out what would have been the maximum time in the pits to fix the power...
Doc, why do you think the tires have lost some grip ? With less tread it should actually be better. Tire temp, tire pressure, track conditions are also factors. I don't have the Sports but the MXXX are good once I get rid of the old hard rubber on the surface.
Clint, no problem. Post the info when you find it.
Tom, a larger MC will put more pressure to both front and rear. Put a prop valve to decrease the increased pressure to the front basically getting it to match the unchanged piston sizes. A second prop valve for the rear turned up to allow for...
"Changing to another master cylinder won't change front to rear balance, since the MC bore is straight through and not staggered. Both ends will get the same pressure."
***********************************************************
Tom's right, I forgot to add that you need an aftermarket prop...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.