G
GTS Dean
- Posts
- 3,425
- Reaction score
- 1
Latest activity Postings About
-
-
GGTS Dean replied to the thread Gen III power steering.Pump/pulley/bracket issues are not 'a thing' for Gen 3s, but leaking hoses definitely are. Dan Lesser with VSP sells top-notch upgraded...
-
GGTS Dean replied to the thread Need advice on '02 GTS for sale.Steve, it's an obvious garage queen with sparing miles. look WAAAAAY up on the frame - it's all just gorgeous. Plated ferrous bits have...
-
GGTS Dean replied to the thread Need advice on '02 GTS for sale.It almost looks too clean and that would normally be a concern. However, with just under 6k miles it was likely only driven on beautiful...
-
GWhen I bought my 2002 RT/10 with 11,000 miles four years ago, a deeply knowledgeable man on Vipers told me to expect to pay another five...
-
GGTS Dean reacted to BoondocSaint's post in the thread Looking for Koni 2812 1999 front coilovers and ACR rear wheels. Anyone? with
Like.
Performance Shock rebuilt my Koni 2812's, 1(800) 965-5664. They had to replace one of the shock tubes with the updated 2812 tubes, so I... -
GGTS Dean replied to the thread Gen 3 Alignment issues.I was checking on some alignment recommendations I had made to an owner on another site a little bit ago and I had a lightbulb moment I...
-
GGTS Dean replied to the thread Gen 3 Alignment issues.I'm pretty certain that a bit of extra compliance, or "give" is engineered into the suspension so that road debris/potholes/lane...
-
GGTS Dean replied to the thread Gen 3 Alignment issues.Kevin, Kudos to you for working through the process following every detailed step. In the instance of heavy crash damage repair, that...
-
GHi, alignment with only standard equipment (plus one set of Mopar caster adapters) and enough time is possible. I do not recommend the...
-
GGTS Dean replied to the thread Gen 3 Alignment issues.Before I got my DRB and Viper tools, I had to wing my rear alignment in the garage. If you remove the tires, free up the cam adjusters a...
-
-
GYeah, my setup and the pictures I posted at the very beginning of this thread are actually the inside of the switch box. I think some...
-
GGTS Dean replied to the thread DRB III Reverse Engineering Project.Are either of you using the magnetic switch box that the two individual inclinometers connect to? I assume so, but haven't seen a photo...
-
-
GGTS Dean replied to the thread Gen 3 Alignment issues.The front end is no problem for any shop. Checking and setting the rear caster angle can't be done without the knuckle adapter brackets...
-
GGTS Dean replied to the thread 95 Viper Inner Fender Removal.I believe they are 1/4" diameter steel rivets. I drilled the heads off, removed the splash shield, drove the rivet nails through, then...
-
Loading…
-
Loading…
