Possible sale of my 1999 ACR Black with stripe delete and comfort group.
Roe S/C, KW suspension, StopTech BBK, Headers, 38000 miles. 585hp 675ft/lb.
Looking around $45000 USD give or take.
21. Drill holes for the nozzles to be placed in the tubes. For silicone or rubber tubes, drill a 15/32 hole. For steel tubes, you can tap the holes for 1/4 NPT pipe thread. Clean and re-install the tubes.
20. Locate the fogger nozzles from the installation kit. The nozzles will need to be installed in the tubes leading from the air filters to the throttle bodies. Mark the tubes in an area where you can place the nozzles, avoid moving parts. Remove the tubes.
I called up ROE Racing and just ordered a new set.
Popped right in no issues and fired right up.
Also installed the 400 LPH Fuel Pump.
BTW the polarity is reversed on the pump. Switch your wires around and you are good to go.
It may have been mentioned in the instructions but I misplaced...
I'll be happy with whatever doesn't leak and gets me the fuel that I need.
Didn't have time to get the rail checked out.
Thanks for the measurements. I'll check them against what I have.
EllowViper
Good call on the removal of the intake tube and just mocking up the fuel rail. I'll do that in the morning and put up some pics.
speedracervr4
I think I might be interested in those if those will work with a 10# setup. Do you have any pictures of them for comparison?
Thanks for...
I bought a used kit and I am in the process of installing it and can't get the injectors that came with the used kit to stop leaking.
These came used and with the kit that I bought here back in 2012.
As you can tell from thread here I've been a little lazy with the install...
It's been over a year and I still haven't found where/how to put these hoses.
Does anyone have pics of their set-up?
I'll look harder for the small vacuum port under the ROE tube.
As for venting I don't have the stock airbox. I have elbows that lead to dual K&N filters. That's it. No air...
What year is yours?
Is it possible to take pics or look at the area I have in question to see what they did?
I'm kind of stumped as to what it should look like there.
Do you have the stock airbox?
After rereading the instructions perhaps I am missing the adapter fitting?
Do I cut the hard plastic line and attach it along with the 90 degree rubber fitting.
Looks like I may have to call ROE for clarification.
I have the smooth tubes figured out. They came with a different intake set up that I will be using.
What I need to know is what happens to the plug and line in this pictures.
It is my understanding the one with the smaller rubber 90 degree boot gets adapted to fit the nipple on the bottom...
I guess I could post over there as well. I forgot I was a member there.
Looks like I will have to call ROE anyway. The air intake system that came with it was designed for 70mm throttle bodies. I'll either sell it and go stock or buy some 70mm TB's.
What good is a forum if that's the answers to choose from? :rolleyes: :)
Yes. I've read the instructions and they do have the contact info.
I was hoping for more from someone who could say "Yes. I know I did this to mine." Or. "Here. I've uploaded a picture of my set up."
But thanks...
Installing the supercharger as per my writeup here.
http://forums.viperclub.org/threads/659047-DIY-ROE-Supercharger-Install-1999-GTS-ACR
I have a question about step 60.
Does anyone have info on what parts I may need? Anyone have pics? Or do I just make that end work as long as it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.