Are paxton novi 2000 pullies interchangeable?

[97snk]

Will a pulley off of a mustang with novi 2000 work on the viper system?

Is the stock paxton pulley 6 or 8 rib?

Does anyone know the belt part # to run with the 2.75 pulley with the 8 rib pulley?

 

[Doug Supercharged Vipers]

The pulleys are "somewhat" interchangeable. It depends on the offset. A spacer can assist the offset.

The stock pulley is 8 rib. The stock pulley size is a 3.75"

The stock belt is a gates or equivalent: K080485 -GATES.

The Gates belt sizes are here: http://www.gates.com/oreilly/PDFs/SizeListings.pdf

Hope this helps!

 

[97snk]

The pulleys are "somewhat" interchangeable. It depends on the offset. A spacer can assist the offset.

The stock pulley is 8 rib. The stock pulley size is a 3.75"

The stock belt is a gates or equivalent: K080485 -GATES.

The Gates belt sizes are here: http://www.gates.com/oreilly/PDFs/SizeListings.pdf

Hope this helps!

Thanks Doug...I can't seem to understand what belt would go with the 2.75 pulley from that link, could someone give me the exact belt number...