Big Red on the dyno. . .

ROGUE

Enthusiast
Joined
May 25, 2006
Posts
276
Reaction score
0
Location
SoCal
Lets hear it. How did the heffner wonder do on the rollers? :eater:
 

00SVTdubs

Enthusiast
Joined
Jul 15, 2003
Posts
644
Reaction score
0
Location
Fort Collins, CO
I bet it made some serious power since hes going all out this time with BIG RED

I bet 1000rwhp on like 9psi for the pumpgas tune and 1700hp at 25psi for the "race" tune

JID's CPE TT car made 10xx at 11-12psi before the fresh motor with the last turbo system and 1496rwhp at 25.5psi so with Garys badass motor he had built (JID's wasnt that extreme) and almost the same turbos as JID... my numbers arent too crazy

what do you think rogue? Got any estimates?
 

Pitt Formula Racer

Enthusiast
Joined
Feb 23, 2005
Posts
6
Reaction score
0
Location
Pittsburgh
I am gonna go out on a limb and guess 1100 RWHP @ 5500 RPM and about 1200 foot pounds @ 4600 RPM with 17 psi and 93 octane.
 
Last edited:

00SVTdubs

Enthusiast
Joined
Jul 15, 2003
Posts
644
Reaction score
0
Location
Fort Collins, CO
17psi and 93 octane.... are you serious? Garth's car ran like 7-8psi on pump gas.... 17psi seems high but who knows.

And 1100rwhp on 17psi is REALLY LOW. JID's car made 10xx on only 12 and he doesnt have the badass motor build that Gary had on his website. I wonder about the tq, i wouldnt think it would be more than hp with 76's but you never know. Im curious to see how the tq stays up or drops off...


I wonder when he will reveal it? It should be awesome with all the hype about it
 
Last edited:
OP
OP
R

ROGUE

Enthusiast
Joined
May 25, 2006
Posts
276
Reaction score
0
Location
SoCal
If my car made 1100rw @ 17psi with 76GTS's I would hide in embarrassment, I don't care what fuel it's being run on. Thats pitiful.


I would think with such a nice motor build he could at least match the numbers JID put down. Then again maybe the efficiency of that front mount kit is really starting to shine. :2tu:
 

Joseph Dell

Enthusiast
Joined
Oct 2, 2000
Posts
3,463
Reaction score
0
Location
Atlanta, GA 30338
So this guy walks into a bar and says 'bartender... how many nutswingers from one camp can you fit onto a single VCA thread?' the bartender looks up and casually answers: ' All of them!'
 

Daddy Long Stroke

Enthusiast
Joined
Jun 23, 2005
Posts
198
Reaction score
0
Yes Dubs, I will have a picture of what you were looking for a little while back as soon as I get them mounted-
My new AWD hunting shoes-
You must be registered for see images
 
Last edited:
OP
OP
R

ROGUE

Enthusiast
Joined
May 25, 2006
Posts
276
Reaction score
0
Location
SoCal
PSI don't mean a 'thang unless you know the compression of the motor...... !


I agree... but needing 17 to make 1100 just looks like **** all around. If the compression is that low to need that much pressure to stuff the air through the heads/intake manifold it's going to be a slug off boost.


btw NIIIIICE road race tires. Those the same ones Ryan has on the GT?

I need some of those in 28x14x18 :drive:


Joseph- I'll assume I was excluded from that nutswinger statement.
 

utahviper

Enthusiast
Joined
Jun 21, 2001
Posts
602
Reaction score
0
Location
Utah
My little ole 67's made 985rwhp @14psi. If it made 1100rwhp on pump gas then I would think it would be 12-13psi not 17psi.
 

Latest posts

Members online

Forum statistics

Threads
153,218
Posts
1,682,059
Members
17,714
Latest member
potterb4
Top