Fatman2006
- Posts
- 24
- Reaction score
- 5
Latest activity Postings About
-
-
Everything is off a 2006 Coupe. Prices do not include shipping. Radiator Fan (only the fan) - $300 Radiator Shroud (no hydraulic pump)... -
-
Fatman2006 replied to the thread Broken fan - What Now.Makes sense the stock is 185, so 5 degrees would be negligible to the ECU. That being said at 160 I have no codes.
-
Fatman2006 replied to the thread Broken fan - What Now.Test 3, because I forgot to data log test 2. Ambient Temp 64f 5:17 pm. This is a bit cold for Phoenix and not typically the temps I...
-
Fatman2006 replied to the thread Broken fan - What Now.Good call, I'll data log today with AC on. 160 would normally be too low but I live in AZ and more importantly, I have complete control...
-
Fatman2006 replied to the thread Broken fan - What Now.Thanks for the affirmation brother. I don't track my car so it will never see that load but, 115+ temps in Arizona should put it through...
-
Fatman2006 replied to the thread Broken fan - What Now.Aluminum fan shroud with 12 inch fan on driver's side, 10 inch on passenger side. Single power steering line and capped off return...
-
-
My calculations would only account for the swept area for each fan. I'm not sure if that's the most important aspect or not (I'd think...
-
Fatman2006 replied to the thread Broken fan - What Now.I feel like this is a learning point for me. Wouldn't you need to know blade dimensions to calculate the surface area? For example: A...
-
Fatman2006 replied to the thread Broken fan - What Now.Makes sense and I agree. Unfortunately, I was already down that road so there was no point in back tracking. If this electric system...
-
:nana::nana::nana::nana::nana::nana:
-
Fatman2006 replied to the thread Broken fan - What Now.I'll post some pics when I get home, :2tu:. Genuine question, the hydraulic unit costs less than $100? I think it's important to...
-
VSP will surely expect your car to blow up very soon because you didn't take his idiotic advice. If you can take pictures and post them...
-
Fatman2006 replied to the thread Broken fan - What Now.So I definitely did the electric conversion. I ran a single hydraulic line from the pump to the rack. I capped off the oil cooler return...
-
Fatman2006 replied to the thread Broken fan - What Now.I love hydraulics! Come on old man, I know you have it in you to give me the information :push:
-
Actually, you're about as anti-hydraulic as he is, so why don't you spend your time helping him out? I am waaaay over my allotted time...
-
-
Loading…
-
Loading…
