Recent content by phipplet
-
Wanted: Gen 1 OEM Chrysler Radio
This is the extra CD Changer I have; Now that I think about it, this was the extra for my 99 Prowler. Here’s one like mine in the Viper; https://ebay.us/m/ntF24g- phipplet
- Post #11
- Forum: RT/10 and GTS Discussions
-
Gen1 CD Changer trunk location?
Does anyone have a picture of the Alpine CD Changer trunk mounting location? Thanks.- phipplet
- Thread
- Replies: 1
- Forum: RT/10 and GTS Discussions
-
Wanted: Gen 1 OEM Chrysler Radio
If you need numbers or anything, I have mine completely out, including the CD changer. It took me several years to piece together an original stereo system for my 94. I have an extra CD changer in the box if interested. I had to replace the entire wiring system because the PO cut all the...- phipplet
- Post #6
- Forum: RT/10 and GTS Discussions
-
Stock 1994 Viper clutch?
Looking for suggestions on a good OEM clutch brand for my stock 1994 Viper. I don’t drive it hard. Thanks!- phipplet
- Thread
- Replies: 1
- Forum: RT/10 and GTS Discussions
-
Gen 1 Amplifier connectors
I’d definitely buy the connections! Don’t need the amps.- phipplet
- Post #6
- Forum: What'cha Need for Your Snake?
-
Gen 1 Amplifier connectors
I have both amps. They do have different numbers and the wire colors are different- phipplet
- Post #3
- Forum: What'cha Need for Your Snake?
-
Gen 1 Amplifier connectors
Hello, I have a 94 Gen 1 that I’m restoring back to original. The previous owner cut the connectors for both amplifiers. I’m looking for these connectors. Thanks!- phipplet
- Thread
- Replies: 8
- Forum: What'cha Need for Your Snake?
-
1994 Gen 1 no clutch resistance
Thank you for the advice, I will try that today.- phipplet
- Post #4
- Forum: RT/10 and GTS Discussions
-
Where to locate trickle charger
I just spliced a connector wire for the trickle charger to the battery and tucked it away. Problem solved! Oh! I do have to "squat" down under the car to connect it. Pretty simple- phipplet
- Post #14
- Forum: RT/10 and GTS Discussions
-
1994 Gen 1 no clutch resistance
Hello, Before I start tearing things apart and throwing parts at it. Looking for some Viper mechanic thoughts? I have a 1994 Gen 1 with 56k miles. Went out driving yesterday, pulled up to a stop light. All of sudden the clutch pedal has no resistance / pressure and will not engage the...- phipplet
- Thread
- Replies: 5
- Forum: RT/10 and GTS Discussions
-
Wanted - 96 Soft Top OR Trade for my Gen 1 Soft Top
$1500 included shipping!- phipplet
- Post #20
- Forum: Classifieds
-
Wanted - 96 Soft Top OR Trade for my Gen 1 Soft Top
I finally bit the bullet and bought one. They are no longer cheap.- phipplet
- Post #18
- Forum: Classifieds
-
Wanted Gen1 fuel line
Hopefully someone can help out. I was replacing my original fuel filter (55k miles) on my 1994 Viper. I broke the plastic inlet on the quick connect fuel line coming from the fuel pump. I'm looking for the "male" inlet fuel line coming from the pump. Not sure of the part number. I've...- phipplet
- Thread
- Replies: 1
- Forum: Classifieds
-
1994 RT/10 Idler Pulley fail
While I’m repairing stuff, does anyone repop these?- phipplet
- Post #4
- Forum: RT/10 and GTS Discussions
-
1994 RT/10 Idler Pulley fail
My Idler Pulley on my 1994 RT/10 decided to explode! My Viper has 55k miles. I took the hood off for easier repairs. Replaced the alternator while I was at it. I had a hard time locating the Idler Pulley bolt and washer. I eventually located one on eBay for a 1994 Dodge Ram (Same setup)...- phipplet
- Thread
- Replies: 9
- Forum: RT/10 and GTS Discussions
Latest posts
-
-
-
-
Sourcing Obsolete Parts For Gen I and Gen II Vipers
- Latest: Goggles Pizano
-
-
-
Want to ID this brake duct part that was vendor made- Latest: Tom and Vipers
-
-
