Recent content by Pompe
-
P
Need specs for housing bore
Well well, i am an idiot. I should have figured that out myself... Thanks Greg, exactly what i needed :-)- Pompe
- Post #9
- Forum: RT/10 and GTS Discussions
-
P
Need specs for housing bore
I must be an idiot. I cant find it on viperalley, but there is a reference to viperclub if i need to find engine specs ;-) Anyone else?- Pompe
- Post #5
- Forum: RT/10 and GTS Discussions
-
P
Need specs for housing bore
Sorry, can´t open the link.- Pompe
- Post #3
- Forum: RT/10 and GTS Discussions
-
P
Need specs for housing bore
Hello I bought a new crank and bearings, but one of the bearings gets to small when we put it in place. We tryed with the others, and the result was the same. Is there anyone who has the correct spec for the housing bore and the main bore? The engine is a -01 but i have a replacement engine wich...- Pompe
- Thread
- Replies: 8
- Forum: RT/10 and GTS Discussions
-
P
Need undersize crankshaft bearings / used crank
Hi I bought a used oilcooler for my -00 and i got metaldebree in my oil wich caused my crank to give up on me :-(((. My mechanic told me i need new bearings with undersize 0.30 but i cant seem to find it. Does anyone know of someone who can get these bearings for me? If anyone knows of a...- Pompe
- Thread
- Replies: 2
- Forum: RT/10 and GTS Discussions
-
P
O/T Computer for gearbox (prowler)
Yes, the only answers i got was why, why, why... I thought i would use the excellent knowledge on this forum to try to find a different angle on this problem. I´m sorry if this is to off topic. With best intentions Pontus Q- Pompe
- Post #3
- Forum: RT/10 and GTS Discussions
-
P
Electrical problem gts-97
The alarm is fully operational and the battery is new. I´m thinking that there is some kind of problem with the ground or some other electrical malfunktion. ôm thinking of replacing the whole wiring, but i am going to try to find the problem before i do that. Thanks for the answers, anyone...- Pompe
- Post #4
- Forum: RT/10 and GTS Discussions
-
P
Electrical problem gts-97
I cant start my -97. When the ignition is on, the auto shut down relay is clicking very much and there is no spark. Any ideas?- Pompe
- Thread
- Replies: 4
- Forum: RT/10 and GTS Discussions
-
P
wanted -97 GTS
I have a -97 blue/white in sweden. Give me an e-mail at [email protected]- Pompe
- Post #6
- Forum: RT/10 and GTS Discussions
-
P
O/T Computer for gearbox (prowler)
Hello Im going to put the new Hemimotor in my -02 prowler(front trashed). My problem is that the gearbox needs signals from the engine to work. Does anyone know how to fix my problem? (Or the adress to anyone who could know). Best regards Pontus Q Malmo, Sweden- Pompe
- Thread
- Replies: 8
- Forum: RT/10 and GTS Discussions
-
P
Location of ground cables
I´ve got the green manual (-98) but i cant find any groundcable location at all. Any help would be very appreciated. My friend says that he replaced the cable from another car, so my assumption that the cables are marked a-d could be wrong. Should there only be one groundcable from the engine?- Pompe
- Post #3
- Forum: RT/10 and GTS Discussions
-
P
Location of ground cables
Hello I have a problem with my -97 GTS. I seem to have forgotten to mount one of the engine ground cables. The cable is marked with a "C". I have found the "D" cable coming from the alternator, but where does this cable go? (And where are the "A" and "B" cables located?) Regards Pontus Q Sweden- Pompe
- Thread
- Replies: 2
- Forum: RT/10 and GTS Discussions
-
P
Tightening rear diff
Hello everyone This is my first post, although i´ve had much use for the good tips from your other threads :-) This one i have not found... I have a rather large play in the rear diff which leads to clunking when i drive slowly (not that often...) and its very annoying. Is there any way of...- Pompe
- Thread
- Replies: 5
- Forum: RT/10 and GTS Discussions
