Search results
-
Viper Days at Buttonwillow Feb 21 & 22
Dose that mean your going Fred?- Fast Viper Dan
- Post #3
- Forum: VCA Viper Events and Gatherings
-
Comp Coupe at VOI
Jerry, What can I do to help? Too much work? I have a machine shop, would that help? I can send someone over to pull your trailer! Hell I'll even drive your CC for you and report back how much fun you had! The work will be there when you get back. I'll be at Button Willow instructing if that...- Fast Viper Dan
- Post #11
- Forum: VOI Experiences from the past
-
OT: new car sales question
Second registered owner, =USED My opinion. and if that is true, I think you should get an extended warrantee for no charge just to keep you quiet. Other wise, Is this fraud ?- Fast Viper Dan
- Post #6
- Forum: RT/10 and GTS Discussions
-
Lapping - Front Tire outer edge wear - suspension fix?
Frank might be right about driving harder than your buddy. What I mean is if you go into the corner hotter, you will be grinding your front tire going in and you'll be a little slower coming out. Go for a ride, if you haven't already to see how your friend drives the corners. Simply pulling...- Fast Viper Dan
- Post #10
- Forum: RT/10 and GTS Discussions
-
Lapping - Front Tire outer edge wear - suspension fix?
Pull the sport shims out and give it a try. :2tu:- Fast Viper Dan
- Post #5
- Forum: RT/10 and GTS Discussions
-
Comp Coupe at VOI
Bring it to Thunder Hill or sell it! LOL Jerry I sure would like to see you at Viper Days in March. What are the chances of you making it? There must have been 15 CC's at Willow Springs. Not all racers, just a bunch of people with cool cars having fun. :cool:- Fast Viper Dan
- Post #9
- Forum: VOI Experiences from the past
-
Question about changing to a 180 thermostat
The problem with removing the thermostat is the motor will take longer to warm up. I have drilled holes around the perimeter of the thermostat to help the flow a little. This however also slows the warm up. Chuck is right, if you want to run cooler temps you need a bigger radiator. It seems...- Fast Viper Dan
- Post #12
- Forum: RT/10 and GTS Discussions
-
Tow Vehicle Challange @ V-10 Nationals
V-10 2500 Ram 4x4 hole shot in low range!!! Yea if I could only get enough time off work! :2tu:- Fast Viper Dan
- Post #24
- Forum: RT/10 and GTS Discussions
-
It is that time again!!!!
Dennis, Don't worry, In Texas they have both kinds of music, Country and Western! :2tu:- Fast Viper Dan
- Post #9
- Forum: VOI Experiences from the past
-
Door speaker stopped working?!
Rob may be right, That is what happened to my "99". This happened after a year and half (7500 mi.). Next, the window will not work.- Fast Viper Dan
- Post #5
- Forum: RT/10 and GTS Discussions
-
STOPTECHS 4 WHEEL BRAKE KIT
One of our members changed from stock 01 ABS to 03 ABS. There were some mods needed to do this but they were able to get the 03 brakes inside the 18" wheels. Now, what I want to know is can the 03 brake, disk and rotors work on a 99 with out them being ABS. Just larger disks and calipers. And...- Fast Viper Dan
- Post #37
- Forum: RT/10 and GTS Discussions
-
Lowest Viper insurance in CA?????
State Farm, $800.00 yr. $500.00 deductable.- Fast Viper Dan
- Post #9
- Forum: RT/10 and GTS Discussions
-
chrome or silver fender emblems ?
I believe I saw that in my manual. Use a hair dryer to warm them up. They are held on with a double back tape.- Fast Viper Dan
- Post #16
- Forum: RT/10 and GTS Discussions
-
weight distributing hitch
ViperRay, This is what I use for my 24' Haulmark enclosed trailer. (1000 lb bars) For your Kwick load you might use the 750 lb bars. you can set the tension by where you pull on the chain. I would recommend the sway control also. I started with one and then added a second one on the other side...- Fast Viper Dan
- Post #3
- Forum: General Viper Discussion
-
oil change $'s
Re: oil change $\'s Bill, Dose that include pick up and delivery from CA? :headbang:- Fast Viper Dan
- Post #19
- Forum: RT/10 and GTS Discussions
-
oil change $'s
Re: oil change $\'s Buy a low jack from Harbor freight. I think there down to $99.00 http://www.harborfreight.com/. You should have one any way. Check brakes etc. An hour changing your own oil can be a bonding experience between you and yours. Besides do you really want some one leaving the...- Fast Viper Dan
- Post #6
- Forum: RT/10 and GTS Discussions
-
HUMMER H2 vs. OTHER TRUCKS TO TOW A VIPER ....
Haven't seen it posted so I will add, I have 01 Ram 2500 4x4 V-10 short bed quad cab. 8.5 mpg. pulls like a champ. Yea a diesel would get better mileage but I had an F350 4x4 crew cab diesel for 15 years and I don't travel that much so I switched to gas. Less noise better for the short trip. IMO- Fast Viper Dan
- Post #42
- Forum: RT/10 and GTS Discussions
-
DB Corsa@laguna
Jonathan A club I belong to will be there Feb. 11-12. I am not sure I'll be able to go yet, but it is an opportunity to run my GTS there. Have fun this week end!- Fast Viper Dan
- Post #3
- Forum: RT/10 and GTS Discussions
-
DB Corsa@laguna
Can some one tell me the DB out put on a 99 GTS with smooth tubes, K&N's and 3" Corsa cat back? I want to know if I can run at Laguna on a 92db day. Thanks, Dan- Fast Viper Dan
- Thread
- Replies: 3
- Forum: RT/10 and GTS Discussions
-
clutch going, 16k miles ? Y2K GTS
Andy, No more Super Stock for you! You've been gone for a while, Are you coming down for Viper Days? 25k and my clutch is fine. But you never know tell they go! Driving habits make the difference. A smooth RPM match to avoid slipping even under heave use makes the difference.- Fast Viper Dan
- Post #7
- Forum: RT/10 and GTS Discussions
-
Pre-Oiling and Accumulator system packages- FEEDBACK PLEASE
Viper Days, Willow Springs 2002. Side note here. We lost three engines in our Panoz race cars. Each of them failed at the same place on the track. The front straight. There is a long sweeper that leads to the front straight that is vary fast. We felt the problem was that we ran out of oil. We...- Fast Viper Dan
- Post #32
- Forum: RT/10 and GTS Discussions
-
HAVE TO SELL....BOUGHT
Luc, I was just looking at pictures of an old event and recognized your Mustang convertible. I want to know more about the motor build in that car. Something to talk about at the track between sessions. (Indeed I will be there, What me miss a track day, you gotta be kidding? The only problem...- Fast Viper Dan
- Post #27
- Forum: RT/10 and GTS Discussions
-
HAVE TO SELL....BOUGHT
Joe, Can I drive your comp coupe, can I, can I? I promise I'll go slow, lol I at least want a ride. Are you going to Sears on the 27th?- Fast Viper Dan
- Post #23
- Forum: RT/10 and GTS Discussions
-
HAVE TO SELL....BOUGHT
That's cool Gavin, Fosters car was, and I'm sure still is a vary competitive car. It will probably be like starting over getting used to driving a Fully prepped race car. I hope to see you at the track soon. Have you brought it home yet? Now you need another new trailer. (Been there) South...- Fast Viper Dan
- Post #11
- Forum: RT/10 and GTS Discussions
-
habor frieght tools low profile jacks!! $99.00 right now! Wow!
Re: habor frieght tools low profile jacks!! $129.00 right now! Wow! They slide right under the Viper. I have two and have not had a problem yet. Dan- Fast Viper Dan
- Post #10
- Forum: RT/10 and GTS Discussions
