Search results

  1. M

    Does anyone sell a Fuel Pressure gauge that fits the Shroeder valve / pass side? ---

    Re: Does anyone sell a Fuel Pressure gauge that fits the Shroeder valve / pass side? If all you want is local pressure indiction then go for it. You are right though, space under the hood at the connection is tight but at $18, it's gotta be worth a try. Good luck. :2tu:
  2. M

    Does anyone sell a Fuel Pressure gauge that fits the Shroeder valve / pass side? ---

    Re: Does anyone sell a Fuel Pressure gauge that fits the Shroeder valve / pass side? The images are a bit grainey but I think you'll get the picture. ;) The kit I used was SPA - website here for more info under digital guages...
  3. M

    Does anyone sell a Fuel Pressure gauge that fits the Shroeder valve / pass side? ---

    Re: Does anyone sell a Fuel Pressure gauge that fits the Shroeder valve / pass side? I fitted a permanently installed fuel pressure transducer in place of the Shroeder valve a couple of years ago. It's wired through the bulkhead to the instrument panel and has a low pressure alarm too. It...
  4. M

    Is the drivers side supposed to sit lower than the passenger side? ---

    Mine sits a little lower on the drivers side too, without anyone sat in it - I believe it's what's called "a feature of the product" (hand built)
  5. M

    Changing oil- Don't make the same mistake I did

    LOL How about adding fresh oil before starting the engine......:2tu: We should change the title of this thread to Confession Corner......
  6. M

    Off to Le-Mans 2012 where the new GTS-R is

    Were only a few hours behind you Baz. Bag packed - passport, jumper, bog-roll, weather - CHECK!!! WEATHER? BOG ROLL??? :rolaugh: :idea: Camera..... :drive:
  7. M

    Sports Shims?

    Thanks guys - looks like an no-brainer. Had a play in the garage this afternoon - loosened fasteners, removed shims, cleaned up, greased and replaced without any problems - doing it trackside should be a breeze. If I'd know it was that easy I'd have tried it a long time ago. ::2tu:
  8. M

    Normally Aspirated power upgrade on a Gen 2 (96)

    ......:rolaugh:
  9. M

    Normally Aspirated power upgrade on a Gen 2 (96)

    :eek2: Thanks. We think 585 is pretty much it although need to get back to the dyno at some stage for final tweeks - TBA I've also recently fitted HS roller rockers which may contribute a little. :dunno: All thanks to you MoparBoyy - :hail: Here's a little something I found on U...
  10. M

    Sports Shims?

    Sorry to drag this one back from the dead but... how many people adjust the toe-in when they remove the shims? I'm thinking of removing shims too, which is an easy job, but adjusting the toe-in, reliably, extra tools, yuk..... Is it absolutely necessary? The upper control arm pivot bar dips...
  11. M

    Normally Aspirated power upgrade on a Gen 2 (96)

    Okay, my first 1/4 mile results in after a short afternoon at the drag. Only managed to get two decent runs in :( where I didn't loose too much time wheel spinning off the start or messin-up shifting from 2nd to 5th :curse: Whoever said it was gonna be easy??? I put that down to lack of my...
  12. M

    Looking to buy a brake cooling kit for a Gen II 2001 GTS ACR

    Yeh I agree, the caliper shrouds at $950 where not gonna happen for me either so I designed my own bracket mounted off the hub as an initial/temporary measure - I'll upload a photo later. I figured gettin cooling air down in to the brake and rotor area was the most important thing and was gonna...
  13. M

    Looking to buy a brake cooling kit for a Gen II 2001 GTS ACR

    Hey, this is spookey! I did the same mod 2 yrs ago.
  14. M

    Help me with cooling issue please

    Where is it leaking from?
  15. M

    Normally Aspirated power upgrade on a Gen 2 (96)

    Re-flashed PCM received and re-fitted last week. A huge debt of thanks to everyone who's helped me - beers all round at VOI. The new map is making a huge difference - feels better (more responsive) and sounds smoother at idle. Final dyno test tweeks will resume at some point soon but I was 99%...
  16. M

    Sway Bar Link boot replacement

    Guess they fit Gen2 as well - "put a set on my tab young man, chop chop......" And at that price I'll have a spare set too. :2tu:
  17. M

    Finally broke my differential!

    Did you go with OSG?
  18. M

    Where in the heck does this ridiculous idea that a Viper cannot handle come from?

    Well presented. :2tu: Particularly agree with " smoooooth" driving....
  19. M

    Fuel Pressure Question.

    Ah yes - a lively zero reading of 27psi. Didn't someone recommend a new gauge...
  20. M

    Viper related giveaways / ideas needed

    You hit the nail on the head Lee - I took a friends 12-yr old on a short road trip a couple of weeks ago and it blew his mind - at the end I said you can have one of these too if you get good grades.......
  21. M

    Registration is now open!

    You know it's gonna be worth every penny. :2tu: And if it helps, I'll be their too - IOU beeeeerrrr! :drive:
  22. M

    Jet Hot Coating??

    My understanding of coating headers was to provide insulation to keep heat inside the pipes. This is because hotter zorst gasses flow faster than cooler gasses thus providing a power benefit. A cooler engine bays is a side-benefit. As for cooler side sills (STUGOTS) I believe they should...
  23. M

    To bring my Viper or not

    As I'm in the UK, shipping my Viper would be expensive and also mean she'd be out-of-action for a long time - not an option. Some have done it in the past, but not me. So I'm gonna go and have just as much fun as I possibly can without my snake BUT I gotta ask this question now to avoid beatin...
  24. M

    Normally Aspirated power upgrade on a Gen 2 (96)

    Couldn't agree more - absolutely great job. :2tu: PCM and flash tool now on there way to Sean Roe to get the program flashed. With a fair transatlantic wind I should get it ready to fit in a week. Roll on the next Dyno day although I'm not sure I'll be brave enought to do any more...
  25. M

    Wanna talk Gen 5 Vipers? SRT Chat HERE on April 24th>>>>>>>

    Do you have any idea how long it will be before we start seeing the new Viper competatively racing in Europe? It would be awsome to see her kicking ass again at the Nurburgring an Le Mans.

Latest posts

Members online

Total: 547 (members: 1, guests: 546)

Forum statistics

Threads
153,917
Posts
1,687,204
Members
18,548
Latest member
Vip08

Share this page

Top