Search results

  1. S

    94 Viper won't start!!!

    94 Viper won\'t start!!! Hi all, a friend of mine is having a problem with his 94 R/T..parked it last week now it will not start.it cranks but no fuel..we have checked relays etc,and when I jumper the rear relay in the trunk the fuel pump comes on,and the car will start and run tried new relays...
  2. S

    Has anyone changer their intake?

    Hi all, long story short found the recent problem with my viper to be a cracked upper intake runner.I currently have the early style (4 ribs on each runner)intake. I got a used one that is the newer 3 rib from Jon B. but the fuel supply line is different ...new one is a thread in line old was a...
  3. S

    94 R/T ....CRACKED INTAKE

    Well some of you have been trying to help with my 94 R/T not running right.....turns out it has a crack in the driver side runner spraying fuel everywhere and right down the throat of cyl # 10 how? why? who knows!!!!! obviously unrepairable ....so does anyone have a stock intake they would like...
  4. S

    Viper not running well...

    Ok here's the scene....took the Viper out last night ( 94 r/t) Iimmediately noticed it was runnung roug from 1-3k rpm brought it back home..next morning checking it out...would not start hat to go WOT to get it to start...running very rich, plugs appeared fouled ..replaced them ..same...
  5. S

    gen I rpm window switch

    has anyone installed a rpm window switch ( for nitrous) into a gen ! viper? if so which wire does it go to for the tach signal....any help would be great!!!!1
  6. S

    rpm window switch and a gen I

    Hey everyone....I have a 94 R/T 10 with a nx nitrous kit...I have a MSD rpm window switch that was modified by MSD to work with the viper...my question is where is the correct place to obtain the rpm signal? if anyone knows, that would be great...thanks in advance
  7. S

    New Stereo!

    Ive had mine for about two months and love it!!!when the face is open things like the presets and track selections are literally at your fingertips.plus the sound options and quality are great for the money. do the mb quarts give you decent bass? that's what mine needs.
  8. S

    which plugs for nitrous for a gen 1

    I have seen alot of posts for the gen 2 plugs to use.....but what would be the best plug for a gen 1, it has the usual add ons exhaust,Roe vec-1, 3.45 gears,slightly worked heads,multi layer steel gaskets, etc. it will be running a 150 nx shot to start....possibly 200 if all goes well.anyone...
  9. S

    rpm window switch for nitrous

    hey everyone, almost finished installing my NX kit on my 94 R/T but still need a rpm window switch does anyone know where to get one? any help would be great.
  10. S

    rpm window switch

    Does anyone know where to find an rpm window switch for use with a nitrous system? I called MSD but they basically gave me the run around, and said they didn't have anything specifically for the Viper. it's for a 94 R/T 10 thanks in advance for any help.
  11. S

    160 thermostat part #

    Put the 160 thermostat in my 94, it works great it really makes the cooling fan more functional,it was a relativley warm day here and normally my coolant gauge swings to the yellow, today it barely went past the third line.to those who wanted the part # it's a Gates green stripe thermostat...
  12. S

    heads milled too much!!!

    just finished putting my 94 R/T back together....but not as easily as it came apart....long story short, it blew a head gasket heads were slightly warped, had them fully machined and block checked for protrusion (ok) used new multilayer gaskets,but when I reassembled, the intake didn't fit...
  13. S

    anyone ever use a 160 t-stat?

    A friend of mine has a 160 thermostat he was going to use on his 94...but sold car, I have a 94 R/T and wonder if it would help? anyone ever try a stat that low?
  14. S

    Anyone know the torque specs..........

    I'm finally re-assembling my 94 R/T, and I am using the new style 3 layer steel head gaskets, does anyone know the propper amount of torque to use, and should I follow the tightening sequence in my 94 shop manual? (I have been told the torgue values listed no longer apply) any help would be...
  15. S

    warranty trans for a 94 ?

    Has anyone heard of this........I'm replacing my cluth and flywheel and need to get my trans fixed, when I removed the trans I found a sticker on it that read: This trans is covered by a warranty exchange program cal 1-800-542-3077 before any repairs.I've tried the # but it is always busy...is...
  16. S

    Fel Pro head gaskets........

    I have a set of the three layer steel head gaskets for my 94 R/T I was told something neede to be trimmed to fit exactly...does anyone know about this? once again any help would be great,trying to get the heads back on this weekend.
  17. S

    parts questions? try John B.......

    No this is not an ad....I just wanted everyone to know what a huge help John B. at parts rack has been, in a matter of a couple days he basically resolved all my parts needs for my 94 R/T ...and at a hell of a good price. John also has alot of good info relating to applications etc. so before...
  18. S

    To blow or not to blow..ok not what you think....

    Does anyone know if there is a supercharger kit available that I could install myself? (I'm no stranger to supercharging, set up my 944 with a novi 2000 and a Vortech on my 91 Mustang GT)Oh yea this would be on a 94 R/T. Any insight would be great!
  19. S

    94 R/T blown head gasket update

    Well the heads are off, I immediately found the gasket to be cracked from the coolant passage to the #7 cylinder and showing signs of the same on at least three other cyls. to the naked eye the heads appear to be ok but I will let the machine shop be the judge...at the minimum they need to be...
  20. S

    94 R/T Blown head gasket???

    I have an 94 R/T 10 with what appears to be a blown head gasket it has been using coolant and getting air (exhaust gas?) in the cooling system.Visually it looks like the #7 cylinder..the plug is covered in an orangish residue and upon removing the intake the runner and intake port down to the...

Latest posts

Staff online

Members online

Total: 920 (members: 15, guests: 905)

Forum statistics

Threads
153,233
Posts
1,682,241
Members
17,726
Latest member
Doug Chase

Share this page

Top