Search results

  1. V

    Aries gets TWINS!

    These are Precision 6265 turbos.
  2. V

    Aries gets TWINS!

    For those of you not going to the Crab Feast this weekend... this is what you will be missing... http://www.flickr.com/photos/cncenginedynamics/5867256793/in/photostream http://www.flickr.com/photos/cncenginedynamics/5867256461/in/photostream/...
  3. V

    Aries gets TWINS!

    Our videographer is out of the shop today... He'll be back Monday morning and we'll get some videos up. I'm sure by that time, we'll have some Crab Feast videos to go along with it. :)
  4. V

    Aries gets TWINS!

    The Viper moved to the dyno today and the front bumper was installed. http://www.flickr.com/photos/cncenginedynamics/5843071421/in/photostream Tuning starts first thing Monday morning.
  5. V

    Aries gets TWINS!

    Hey Guys, Just to clarify our definition of a kit... In my experience over the last 14 years in the performance industry, nothing stated as a "kit" from a manufacturer just bolts on without some sort of modifications, so I have made it our mission to always custom build your "kit" for your...
  6. V

    Aries gets TWINS!

    YES! This kit is available for any Gen Viper. Each kit is custom made to ensure perfect fitment.
  7. V

    Aries gets TWINS!

    Heat Resistance is a VERY important part of this build!!! http://www.flickr.com/photos/cncenginedynamics/5816571836/in/photostream http://www.flickr.com/photos/cncenginedynamics/5815999515/in/photostream/ http://www.flickr.com/photos/cncenginedynamics/5819180926/in/photostream...
  8. V

    Aries gets TWINS!

    We've got an update!! We took out the spare Viper engine we have and set the turbo kit up on it so everyone can see the entire kit! Next step, installation! http://www.flickr.com/photos/cncenginedynamics/5815685072/in/photostream
  9. V

    Aries gets TWINS!

    Twin Turbo Viper | Flickr - Photo Sharing!
  10. V

    Aries gets TWINS!

    A few more pictures for the end of the day. The massive intercooler core: IC Core | Flickr - Photo Sharing! The placement of the Moton reservoir (had to relocate for fitment) Moton Relocation | Flickr - Photo Sharing! The Tial Wastegate mockup in the passenger side wheel well...
  11. V

    Aries gets TWINS!

    We are in the process of installing the custom twin turbo kit on the 06 SRT-10 for Aries. We've got some progress pictures to give you guys a tease. :) Underside View | Flickr - Photo Sharing! Pass side exhaust | Flickr - Photo Sharing! Passenger turbo | Flickr - Photo Sharing! Driver...
  12. V

    Metal shaving on drain plug!?!

    The bearing material is non-ferrous unless the shaving is from the backing on the bearing then you are in trouble...but there would be alot of those shavings. If it's stuck to your magnet then it is a ferrous material so it can only come from a piece of the sleeve, ring, wristpin clip, a...
  13. V

    Gen IV Engine swap into a Gen III?

    Twin DOHC setup with variable controlled intake and exhaust cams along with a pent roof and 4 valves per cylinder, twin GT52s and 600hp per liter. That's a design... Pushrods are over a 100 years old.... Until someone comes up with the $$ to build a Dohc head for this engine it will remain...
  14. V

    Where is this oil coming from

    Go down to your local CARQUEST/NAPA/AUTOZONE etc... get yourself an oil leak dye kit... Pour in the little bottle.. put on the fancy yellow glasses...and shine the UV light on the wet areas and follow the trail. Make sure you start off looking for it on the jack stands while idling then move to...
  15. V

    Air-Air Intercooler 4 Paxton

    That is interesting to hear. I guess we will have to test that then. Doesn't make sense that the factory would use a sensor that's not PAR since the car relies on the AIT as an important part of tuning. On a Speed Density setup BARO, AIT and MAP sensors are key to the tuning the car... Howard
  16. V

    My AR Fabrication 540ci stroker motor

    Yea...It comes up much faster if I just stabbed the throttle but it breaks the tires loose on the dyno 3 out of 5 times I do it, so the torque curve is a little shy of what it actually does down low since I am "rolling" on the throttle. I sent Aries his plot vs a Stock SRT-10 with the...
  17. V

    Project: Bullet-proof V-10

    WOW! Yea the last one was 42g in the rear and 29g in the front to be exact. And yes a Carbide bit was needed to get through the thing as well! And there is nothing like drilling it on the Balancer-crank-jig designed for crankshafts 6-8" shorter. Would have preferred to be able to set the crank...
  18. V

    Air-Air Intercooler 4 Paxton

    Years ago we ran a Large SC on a Honda running 22psi with an Air - Air Ic for drag use and it didn't seem to lack anything that more boost or Cubic inches couldn't solve. I will admit liq-water is much better when used with ice water in a tank... But the pressure drop on these SC systems due to...
  19. V

    Project: Bullet-proof V-10

    Another point to consider is what does introducing water/meth into the mix bring? Methanol is bad. (Mr. Macky off of South Park for anyone who watches) not really, but it has it's pitfalls!! Lol 1) when it's used as a supplement fuel and fails... It's bad. 2) when your guides are not...
  20. V

    Project: Bullet-proof V-10

    A few things to look at with your project that may have been brought up but were not thoroughly explained. When using the Roe SC at higher boost levels Or the use of nitrous will increase the cylinder heat above normal at the power level you seek. So what was stated above about these power...
  21. V

    My AR Fabrication 540ci stroker motor

    Not that it relates to an SRT10 engine but we use Kelford Cams in NZ for our custom camshafts for Skylines, Supras, Subarus and Hondas. Because Kevin really knows alot about vavletrain and has a first class CNC machine to build his stuff and a Fair price that's worth the shipping cost. I would...
  22. V

    My AR Fabrication 540ci stroker motor

    Lets add more fuel to the camp fire! Spacers required for the oil cap to clear the TD rockers by "House of Billet/Fast-Hemis.com". (BTW...for the people that are purchasing TD rockers newer than 2004...do not worry TD fixed this problem a long time ago...BUT LPE had no clue as expected...)...
  23. V

    Loud Clanking noise from pass side of motor

    Here is a list of possibles: (GENERALIZED) Failed rocker / bent push-rod / collapsed lifter / bent valve Cracked piston Rod bearing failure Wrist pin failure Cutting the oil filter open and inspecting it will help determine whether or not you have any metal from a bad bearing...
  24. V

    My AR Fabrication 540ci stroker motor

    We will let anyone be apart of their personal build(not hands on in our shop of course)... We will give our opinion and share yours as well... If I feel that we are going in the wrong direction I'm not scared of stating it...but I won't take any responsibility for the end result either... We...
  25. V

    My AR Fabrication 540ci stroker motor

    I'm not worried.... Its only 100whp per hole we are going for... Funny how most will not show their work... but thats probably because most facilities do not do their own work.

Latest posts

Members online

Total: 719 (members: 6, guests: 713)

Forum statistics

Threads
153,232
Posts
1,682,215
Members
17,721
Latest member
cookviper

Share this page

Top