Hello,
My friend is torn between purchasing a Z06 or a Viper. I was hoping to speak with someone who owns both (or owned both at one time). What are your thoughts between a Z06 and Viper?
Thanks in advance,
D
Hello,
I have a friend who is looking to buy a 2008 Viper. I want to ensure that he has the best advice and I am not familiar with the Gen 4s. I was hoping you guys could help me determine if the car is a good deal? Here is a link to the Viper advertisement...
Hi Johnory,
I noticed my exhaust tone changed slightly and I felt the car was a bit more powerful on the highway in 6th gear.
I hope this post is helpful.
Cheers,
D
Hi Everyone,
The CEL on my '04 popped up recently. I scanned the code and it returned P0432. I deleted the code and the CEL came back a day (or two) later.
Could this be an O2 sensor issue or do I need a new Cat?
Thanks,
D
I live in Ontario where the Cops use LIDAR (aka laser speed measurement device). LIDAR/RADAR detection devices are illegal in my province. :mad:
I am seriously considering a laser detector and a laser jammer combo. The laser detector will indicate when I am tagged by the Cop's LIDAR gun and...
Hi Everyone,
I purchased a new 2" Seat Lowering Kit from PartsRack.com and I am installing it this afternoon. I am trying to get the two front brackets to line up properly to go into car floor but I am having a helluva time. Any ideas how to get the front brackets to line up with the holes...
Hi Everyone,
I need new wiper blades. I approached my Dealer in the Toronto area and they quoted $60CDN per blade. What a ridiculous price for a common item.
I looked around at the local Ontario car parts stores; Canadian Tire, Part Source, etc and I could not find replacement blades for...
Hi!
A month ago I started to hear a loud squeak from under the hood on cold starts. I replaced the belt and the sound went away.
A month later the sound is back. It is quite loud on cold starts and quiets when warm/idling. When I rev the engine while warm (in a stopped position) I can...
Hi Everyone,
I am between 6'0"-6'1" tall and I am always slouching when I stop at an intersection to view the traffic light.
Do you recommend a 1" or 2" seat lowering kit? Also, where do you recommend I purchase the kit (Canadian retailers are welcome)?
Thanks in advance,
D
Thanks for your thoughts mjorgensen. Apparently it will take 3 hours because they need to go in from underneath the convertible top and replace the seat belt assembly.
Does that change your statement?
Thanks,
D
Thank you all for your post. I went to the Ontario Dodge Dealer in Mississauga and they scanned the code for free (nice guys).
They said the code is coming from the driver's seat belt assembly. It will cost $280 for the part + 3hrs work is $580CDN + Taxes.
Should I bite down and go for the...
I guess we will find out soon :)
My Camaro had a small leak and it was fixed using a similar method (recharge+sealant). The kit from Walmart was surprisingly great quality.
HI Eucharistos,
I used one 17OZ can of refrigerant to bring the pressure to normal. After driving for 20 minutes I noticed the pressure dropped a little so I added the sealant (4 OZ). I am hovering around mid to high 30PSI.
I may need a "top up can" in the near future. I will check out...
Thanks for your help guys. Martin's statement above is absolutely accurate in every aspect and confirmed by the "Duracool Manufacturer Chief Engineer".
Since my system was out of refrigerant and it was ~30 Celcius outside the compressor kept kicking off to protect itself. The high pressure...
Hi Everyone,
This afternoon I purchased an A/C recharge kit from Walmart. Steps I took (in order).
1_Started the car and turned on the A/C to max.
2_Took a can of R134a and screwed in into a/c recharge hose (with gauge)
3_Connected the other end of the recharge hose to my low...
According to the description it does both R12a and R134a. I will see if Walmart sells the same kit you referred to in your last post.
Thanks for your advice Eucharistos
Hi BlueSRT,
I believe I was going to the proper low pressure port. The Low Pressure side is the closest to the passenger seat (whereby the high pressure side is closest to the nose of the car)?
Thanks,
D
Hi Boxer12,
Thanks for the quick reply. I was unable to get the sleeve on the recharger fitting to slide down over the low pressure side nozzle. It was as though the low pressure side nozzle was slightly big.
Thanks,
D
Hi Everyone,
I purchased an A/C Recharge kit this afternoon and I was unable to get the recharge kit connector to fix securely on the Viper A/C port. It seems like the A/C port on the Viper is a tad big (by 100ths of a mm) for the A/C recharge connector. The recharge kit has an adapter for...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.