Search results

  1. A

    Keeping the juice flowing

    John, Harbor freight sales solar powered battery chargers, I have solar panels on my service trucks to charge the batteries while the vehicle is not in use, never had a problem with them. I am sure other places sell solar powered battery chargers also.
  2. A

    info wanted on 2008 coupe Texas

    Here is the link 2008 Dodge Viper SRT | Dodge Vipers for Sale
  3. A

    Low Mileage Vipers

    I understand that people buy cars for different reasons, what I don't get is someone buying a car and putting 150 miles on the car and selling one or six months later. Did the person not understand what they are buying, or is it a bucket list thing? I have been looking at Gen 4 cars and many of...
  4. A

    info wanted on 2008 coupe Texas

    I am looking at a Red with White stripes 2008 coupe at Tomball Dodge, has a VCA plaque on the dash, any information on this car? Car has headers, exhaust upgrade and 3:33 gears. Thanks
  5. A

    Interested in RT/10

    I installed side pipes on my 2002 RT/10 using high flow cats,gen4 mufflers and turn outs, seal covers from Autoform. I did the work myself including paint, for a cost of around $1900.00. I know some would say thats alot of money for side pipes, but it is a Viper and it should have side pipes. I...
  6. A

    Interested in RT/10

    I have a 2002 RT/10, I do all the maintenance on the car. Parts are reasonable, I have changed all the fluids, the power steering pulley and bracket, clutch slave cylinder and clutch, shifter, brakes, exhaust and wheel bearings all in my garage without a rack or special tools. So if you are...
  7. A

    Looking for 2002 rt/10 graphite

    I know when I purchased mine I looked for five years. The car had 25K on the clock. I think mine is 1 of 40 built. Good Luck with your search.
  8. A

    Looking for 2002 rt/10 graphite

    I have a2002 Graphite Rt/10 that is stock except side pipes, smooth tubes B&M shifter, woodhouse mounts, ipsco pulley and bracket. I have every piece I have taken off the car in boxes including the side seals to make it stock. I am thinking about purchasing a Gen V, looked at one Friday. My car...
  9. A

    Audio question RT/10

    Thanks for the replies, I found a replacement 6.5 inch subwoofer with 125 watts and 6 ohms. It had exact same mounting, I just installed it and it sounds just as good or better than stock. I purchased mine from www.mavin.com
  10. A

    Audio question RT/10

    I have a 2002 RT/10, last year I replaced the door speakers with Polk 5 1/4 inch speakers 4 ohm, now the subwoofer in the console is torn and needs replaced. I did a search and found the most popular choice is the JL 6 1/2 subwoofer, but it is only 4 ohms and OEM is 6 ohms. My question is does...
  11. A

    Brakes

    If all you are concerned about is the brake dust, use ArmorAll Wheel Protectant. I have used this for the past summer and it works great. I put 30 miles on my car a day and the wheels will stay nice for about a month. Just make sure you follow the directions on the spray can. I purchased mine at...
  12. A

    Gen III/IV owners that own(ed) a Gen I/II

    I have a 2002 GenII RT/10 and have been looking at GenIII and IVs. The newer generations have more room. I am 6'3" with 34" inseam and I made seat brackets that lower the seat almost 3" and I can just get a helmet on with the stock top. I have a three piece trunk top and I just fit with no...
  13. A

    Trunk Top

    This topic can be closed
  14. A

    Vipers Prices Gen 3

    I have a Gen 2 and have been looking at Gen 3 and Gen 4 convertibles. The Gen 3's seem to have issues with oiling, and now the rear control arm, which hurts the value of the car. I would rather pay $15,000 more and purchase a Gen 4 than buy a Gen3 and put $5,000 in it to fix the problems it seem...
  15. A

    Trunk Top

    Looking for new weather stripping for my trunk top, I have a gen 2 RT/10, and I think it is the second generation trunk top from mach 7
  16. A

    Vibration "changed" with new motor mounts

    Theeonlybatman, when you removed the mounts did they look bad? When you are driving your car at 2000 rpm did you try letting of the gas and pushing in the clutch to make sure the vibration is coming from the engine and not the drivetrain?If it goes away the vibration is caused by the engine. I...
  17. A

    Side exit exhaust options please.

    I must be a wuss, I tried Daves set up and took it off. I am currently running Radom tech high flow cats and 2010 viper stock mufflers and turn outs, which for me is doable but still dam loud. What ever you do do not cut holes in your side seals until you run it with the side pipes first, this...
  18. A

    I might start a war here but I'm gonna ask anyways...

    Johnny, for what it is worth, I own a 2002 graphite RT/10, I live in Pennsylvania and I too wanted the top down experience, that being said in the two going on three years I have owned the car i have went topless maybe four times and I have the three piece top along with the stock top. I think...
  19. A

    The VCA loses one of its own - Viper067

    Sorry for your loss, I liked Victor, our prayers go out to him and his family.
  20. A

    Viper Polyurethane Engine Mounts and Transmission Mount

    I installed the Woodhouse engine and transmission mounts in my 2002 RT/10. The mounts are a direct bolt in, had no problems installing them. I do notice a slight vibration at idle, I have read that this goes away but after 3000 plus miles it is still there, but it is not very noticable...
  21. A

    Best fuel filter replacement now that OEM is discontinued?

    I have a 2002 RT/10, I jacked the car up and placed on stands, removed left rear tire, I then removed the bottom fuel line(output) removed the bolt that holds the filter to the frame and slid the filter out between the inner fender liner and frame removed the top (input) fuel line and installed...
  22. A

    PA members going to VOI

    I will be leaving Wednesday morning from Greensburg Pa. Joel
  23. A

    Cat Delete Or?

    I have a 2002 and the cats are welded in on the front of the cat, slip fit rear or exit of the cat. Also the front is welded right at end of the curve of the 90 coming from the header not much room. If you do a search for exhaust I am sure there is a picture of the stock cats somewhere.
  24. A

    Wicked Sounding

    I bet it felt good. I did some work on mine over winter, nothing major. I added side pipes with hiflow cats, woodhouse mounts, plugs, wires and the power steering pump pulley and bracket. I think I will do gears next year.
  25. A

    Wicked Sounding

    That sounds real good, have you had a chance to drive it? Joel

Latest posts

Members online

Total: 703 (members: 3, guests: 700)

Forum statistics

Threads
153,199
Posts
1,681,913
Members
17,696
Latest member
Viper123456

Share this page

Top