Search results

  1. W

    Starter turning over but won't start.

    if swapping the relay does not work you can get a fuel pressure test gauge at O'Reilys or similar auto parts store they will require a deposit, fuel pressure should be 55
  2. W

    pass seat travel?

    pull the seat you will see to tabs on rails grind or cut off the tabs I have a 94 and this worked for me
  3. W

    1996 RT/10 Fuel Filter Replacement

    great write up from Dan B on this he removed the rear wheel and inner fender I did that also on my 94
  4. W

    WTB Smog legal Edelbrock Headers

    if you put the heat shields on over the manifolds they can not see the headers the smog techs are not allowed to remove any parts for inspection so go for the good stuff. signed a fellow Commiefornia
  5. W

    Removing stock fuel filter on Gne III?

    Don't know about gen 3 I have gen 1 I had to remove the inner fender well panel to get it out there is a thread on one of the other forums VOA or Viper Alley that might be helpful a guy used a tube cutter to separate the filter
  6. W

    Gen 5 Venom Wheels on Gen 2?

    does all this info apply to Gen 1 cars as well I have the stock 17 inch wheels and the tires are hard to find
  7. W

    Tires!

    I don't think anyone makes the tires other than Michelin. The production dates seem to be hit or miss. I bought a new set earlier this year from Tire Rack. The tires that are for sale on this thread are a good price but shipping could kill you. I will probably go to an 18 inch wheel next time.
  8. W

    '96 RT/10 Seat Adjustment Question

    I cut off the tabs that you show in your bottom two pictures which allowed more forward seat travel for both seats
  9. W

    Anyone recognize this bolt?

    might be the bolt that holds your side curtains to the door frame
  10. W

    94 Radiator drain plug and flush

    From previous posts do not unscrew the radiator drain plug take off the bottom radiator hose instead less chance of breaking something. I did not remove the engine drain plugs I know you are supposed to I actually bought the plug remover so will use it next time. I think I will buy the Lisle...
  11. W

    Launch control

    have used launch control on my 2013 vette a couple of times rpms settle around 4000 dump clutch a little wheel spin and off you go its a kick give it a try
  12. W

    Help with my 94

    Had a similar problem anti freeze was coming out front facia turned out to be the radiator cap not holding pressure allowing anti freeze to overflow the reservoir don't know if this is the problem but a new cap is cheap
  13. W

    Clifford Alarm System

    I removed my alarm that came with the car also a 1994 according to the factory manual the car has to be running when you remove it or it will cause a no start condition
  14. W

    '97 RT/10 cranks and cranks then finally starts

    sdo a search on this forum [how to build a primer timer] I did this for my Gen 1 car and it works great don't know if it would be the same for Gen 2
  15. W

    Gen 2 Cam Position Sensor

    I have a Gen 1 posted the same question to the forum. Got a lot of a answers about Gen 2 cmp they seem very difficult if not impossible to find. You might give a call to BWD and see what is going on.
  16. W

    1994 air conditioner question

    I am going to vacuum my air conditioner system and recharge does anybody know if I have to add oil when I do? I have not opened the system or changed any parts.
  17. W

    gen 1 cam sensor

    I ordered cam position sensor from Pep Boys they sent me an email stating they are refunding my account with no explanation I am assuming they do not have one (for gen 1) advanced auto says they have one in stock ordered it this morning still keeping my fingers crossed. Called Rockauto this...
  18. W

    gen 1 cam sensor

    I must have missed it thanks for your help andtime
  19. W

    gen 1 cam sensor

    Rockauto lists the crankshaft sensor not the camshaft sensor I am keeping my fingers crossed found one on ebay correct BDW part #css44 it is supposed to get here on Tuesday.
  20. W

    gen 1 cam sensor

    Has anybody found an alternative cam sensor for a 1994? all the shelves seem to be bare
  21. W

    Starting Problem on my 93 RT/10

    looked around ended up going to the Dodge dealer around 80 dollars
  22. W

    Starting Problem on my 93 RT/10

    hey ViperRed will send you a private message
  23. W

    Starting Problem on my 93 RT/10

    Did this on my 1994 solved long cranking problem http://forums.viperclub.org/threads/625309-How-to-build-a-Primer-Timer-and-cure-your-Viper-Fuel-Pump-Starting-Problem
  24. W

    Starting Problem on my 93 RT/10

    Had the same problem (long cranking before engine would start. Look up primer timer extender on forum. Also check to see if you have an intake manifold leak I did and it played havoc with the cars idle.
  25. W

    Selling Cheap GTS

    did my 94 at about 35,000 miles compression was 180 +- a little with screw in tester much more accurate than push in

Latest posts

Members online

Total: 651 (members: 17, guests: 634)

Forum statistics

Threads
153,189
Posts
1,681,847
Members
17,684
Latest member
Liberty235

Share this page

Top