Replacing head light bulbs on 94 RT/10

[syldogRT/10]

For the life of me I can't figure out how to replace the head light bulbs on my 94 RT/10! I removed the wheel well covers and all the wing nuts on the back of the light buld housing, looked all around with a flash light to make sure I wasn't missing some thing, but the cover won't budge! Any suggestions are appreciated!

 

[Tom F&L GoR]

If you have removed all four (4) wing nuts, then you have to start prying off the back - the dried-out sticky caulk like goo used to seal the cover is pretty tough. With my '94 it was like opening something that wasn't meant to open.

 

[syldogRT/10]

OK that's actually what I thought. Thanks a lot for the help. I'll get an exacto knife and work between the seem til I get through. Boy, this sounds like a lot of fun!

 

[Tom F&L GoR]

The material the back is made of is more flexible than that of the housing. Once you pry it rearwards and get it started it won't be easy, but you'll have the confidence that you aren't breaking it.