Search results

  1. M

    Viper RT/10 Car Cover - Washable?

    When I bought my 95 RT/10 almost 4 years ago, it came with a very nice car cover made specifically for the viper. It has a clear plastic panel where the rear license plate is. Needless to say, it needs to be washed but because of the plastic panel I have not done so because of possible damage...
  2. M

    INSTALLING SIDE EXHAUST COVERS ON GEN I

    I'm trying to install the side covers with the stock insulation on a GEN I and I have a question that I'm sure many of you can answer. When installing the top of the exhaust cover over the lip on the car, does the skin of the exhaust cover slide directly over the lip on the car or does one...
  3. M

    Gen I Side Exhaust Insulation

    Is the fiber board with the foil insulation still available new or even the foil insulation itself because I have the fiber board pieces and they are in great shape? I also have the metal pieces that holds the insulation in place. If it is still available, anyone know how much and a good...
  4. M

    RT/10 Hardtop Questions

    There is a piece of weatherstrip on each rear side of my hardtop that sit on each rear door post when the doors are closed. This piece is about 4" long and has no weatherstrip adhesive or anything else holding it on but another piece of weatherstrip that it slips over and the door post itself...
  5. M

    Gen I Interior trim black paint match??

    I know I have seen a post about this before but did a search and nothing came up. I'm trying to find something off the shelf that will closely match the black dash and trim color in my 95 RT/10. It's not flat black for sure because flat black is a shade of two lighter. I tried Dupli Color...
  6. M

    Side Exhaust Cover Insulation Alternative?

    I have been speaking to a representative of Thermo Tec Inc. which makes exhaust and heat protection materials for the automotive industry. They have a product called Aluminized Heat Barrier which comes in a 36" x 40" sheet and can be applied with their heavy duty adhesive. It protects against...
  7. M

    Front Fascia Painted and Ready For Install

    I've repainted the front fascia on my 95 RT/10 and was looking at the fiberglass front bumper tonight getting ready for the reinstallation of the fascia tomorrow. Is the fiberglass bumper just drilled and tapped for the fasteners that attach the fascia and if so what is the best fix if they are...
  8. M

    What To Replace Side Exhaust Insulation With

    I am repainting my side exhaust covers on a 95 RT/10 and would like to replace the bulky stock foil insulation. Would the insulation on newer RT/10's be the way to go or something that DEI has, etc. Looking for recommendations. I would like to use something that is adhesive backed so I can...
  9. M

    Side Exhaust Cover Paint Question

    I'm repainting the side exhaust covers on my 95 RT/10 as well as the front fascia. The exhaust cover is the same as the body gloss black except for the center section that extends from the front to the rear and has the hole for the exhaust tip to exit. This part of the exhaust cover is more of...
  10. M

    Removing Stock Cats

    I have stock headers and stock cats followed by Belanger Cat Back muffler on my 95 RT/10. I am considering removing the stock cats and replacing with a 3" tube. I know it will be louder but also keep the temp of the side exhaust cooler. It seems to me I read on previous posts somewhere that...
  11. M

    How To Repair 1/4" Hole in Fascia??

    How To Repair 1/4\" Hole in Fascia?? Does anyone know if the front fascia material is ABS or RTM and if so what is the correct method to repair (4) 1/4" drilled holes (front license plate bracket mounting)? Will fiberglass reinforced filler work or should I try to get a "flex filler" made for...
  12. M

    Question For Painters - Flexible Part

    I am getting ready to paint the front fascia of my black 95 RT/10. I'm using House of Kolor KS11 Ko-Seal black primer sealer, PPG DBC 9874 black basecoat and PPG 2021 Clear. I know a flex additive needs to be added to the clear but is not required for the DBC basecoat. What I'm wondering is...
  13. M

    Heat Insulation in Side Exhaust Covers

    As I mentioned in another post I have removed the side exhaust covers to repaint as well as the front fascia. I noticed that the foil heat insulation inside the cover is held in place with aluminum rivets. The heads of the rivets show from the outside, both top and bottom of exhaust cover. Is...
  14. M

    Removing Front Fascia on 95 RT/10

    I'm removing the side exhaust covers and the front fascia to prep and re-paint. I've got the exhaust covers removed and all the bolts and fasteners from the front fascia. Since the sides of the fascia are wrapped around the side supports, what is the best way to remove it. Obviously, I don't...
  15. M

    Installing Headers. Questions.

    I'm thinking of installing a set of Belanger headers on my 95 RT/10 myself. I've done a considerable amount of automotive mechanical work so I'm confident I can do it. I just have a few questions for those that have already done it. 01. Are the heat shields just held in place by the nuts on...
  16. M

    95 RT/10 DYNO RESULTS

    Well last week I finally got my 95 RT/10 over to Larry at Macedo MotorSports for a base line dyno. Larry checked the car out and then ran three dyno runs with cool down periods between. Each run got stronger which was nice to see. The only mods I have are smooth intake tubes, K&N filters...
  17. M

    Mopar Performance Headers

    Does anyone have any experience with Mopar Performance Shorty Headers for Gen I Vipers? If so, how do they compare to Belanger, B&B, etc.?
  18. M

    Spark Plug Change - Any Secrets?

    I just installed the skip shift bypass harness and changed the oil and filter today so I felt pretty good. Next I want to change the plugs. The plugs on the left side should be a piece of cake since they are very easy to get to. Since the right side plugs are very tightly concealed I just...
  19. M

    Aluminum Fan Pulley Set Worthwhile??

    I know others who have installed billet aluminum pulley sets on Cobras for instance and have gained a substantial hp increase. Does anyone have them installed on a GEN 1 RT/10 and if so was it worthwhile at a cost of approx. $400-$500?? What would be the approximate gain in hp?
  20. M

    Lower Back Adjustment Pump Bulb on Seat Needs Replaced

    The passenger side bulb that you pump up the lower back support with is ripped and needs replacing in my 95 RT/10. Any idea where I can find a replacement? Looks like one you would find on a blood pressure unit. Thanks
  21. M

    Aftermarket Side Windows And Installing Skip Shift Eliminator

    I need some help from those who have them in deciding which after market side windows to go with for my 95 RT/10. I hate the looks of the factory soft side windows. Let me know what you think. Also, what is the easiest way to get the car up in the air in the garage to install the skip shift...
  22. M

    New Member/Best Performance Upgrade for 95 Gen I RT/10

    Just wanted to say hi to everyone and let you know I'm a new member and a proud new owner of a Black 95 RT/10. It is in excellent condition and has mods of Bellanger cat-back exhaust, MGW short shifter, 3.73 rear gear, K&N filters and smoothie air intake tubes. I will be taking it to get...

Latest posts

Members online

Total: 809 (members: 10, guests: 799)

Forum statistics

Threads
153,202
Posts
1,681,947
Members
17,702
Latest member
Drock187

Share this page

Top