There is a good spot in the upper left side of the trunk. You can drill a hole thru the wall and it will lead you into a void above the rear wheel well. You need to remove the wheel and then the wheel well cover and you will be able to see the back of the trunk. There is a 4” hole in the upper deck just behind the driver seat that works really well for running wires thru to get into the interior. It has a big grommet covering the hole. I cut a hole in that grommet and ran all my wires thru it. Where you go from here depends on what you want to do. I removed the sport bar and then the ********* plastic cover. Once you a have done that you can go any where. I have a CD changer, satellite tuner, antenna and rear LASER pick up running into the trunk area. When I was doing that I also ran a couple of extra wires for some unknown future project. I have 12K miles on that set up with zero problems. Have fune.