Be sure to use the same dyno for a real comparison.
Let me know when you are ready to do your car. I'll stop by and help.
I'd like to see what it is like to wrench on one of these cars.:D
You make me wonder If I am right. This is the number the Carlilse announcer said on the loudspeaker just before the drawing Saterday evening. Next year I shoud count them myself.:dunno: Sorry if I am incorrect.:crazy2:
It is 2,290 cars.
"The Carlisle Chrysler Nationals is a Mopar-lover’s...
While the engine is cold run water from the garden hose on the top of the center of the plenum (intake) to the top of the engine. (Of course not inside the engine) This will dilute the antifreeze and wash it out. If you wish you could dump a bucket of soapy watter in there too. After that run...
Great idea with the dark wire mesh. I'll do that after the show. Thank you for the great idea. :headbang:
There is nothing under that part of the cowl to be concerned with washing or getting wet. All wires are sealed pretty good and if you plug wires are effected by the water than they will...
It does already make a difference. Just remove yours and run the car to see how much of a difference it makes. I can see the heat coming out when I am sitting at a red light. The engine cools down quicker too after I shut it off. Also remember I put a hole in my speaker cover and that realy has...
After being ribbed about how bad my car looked with the plastic cowl removed. I finally vented it. Here you go Carmen, now it will look good for the Chrysler car show in Carlisle. I did this for you Carmen! I'll make you proud of the locals!
BTW, outputing 618 HP and working with the latest...
I would be interested in this hood but I also see changes I would like. The biggest problem with my car is getting rid of the heat. I would love to see the scoop much larger to catch more air and I also would love to see the hood one inch larger and with a cowl-induction opening at the rear like...
What a great event. I really enjoyed myself. We got a really great group of Viper owners here. Thankfully the rain did not come and the sun did not come out till the end of the event. Here is the link to my pictures. Again, what a great bunch of people! Thank you
Link to more pictures...
A local gave me directions. I hope I can folow them.
take 81north to 309 south.... outside of tamaqua on 309 south you will drive a couple of miles untill you see 443 you will turn left onto 443 stay on that road untill you get into lehighton (will be a couple of miles)...... once you get into...
This is all good stuff and the detail here is great. So when we put the Paxton setup on these cars we need to swap out the crank shaft pulley. As it is smaller it tends to spin the alternator pulley slower. Hence a smaller alternator pulley would make up for the difference in diameter in...
I don't have the answer but I just bought a new volt/ohm meter from harbor freight which has a db sound level tester. I only paid $35 for this meter and the db tester works great. It would be a good idea for you to check your own level of sound.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.