Recent content by Gibz
-
New podcast / article on Never Stop Driving; "Life and Death of the Dodge Viper"
hey all, check out this article and podcast on a new interview with some of the men behind the creation of the viper: "It's Viper-palooza for this week's special edition of the podcast. Larry Webster hosts "Grail Keeper" Herb Helbig and "Mr. V-10" Dick Winkles, who helped develop, design, and...- Gibz
- Thread
- Replies: 0
- Forum: General Viper Discussion
-
Gen 2 Yellowbox calibrator
It could be a bad yellow box. It could be you have the input and output of the box reversed- the blue and white wires. try switching them because the box is a PWM modification circuit and I imagine it wont work in reverse. I installed mine but not tested yet. My guess is white should go to...- Gibz
- Post #9
- Forum: RT/10 and GTS Discussions
-
Gen 2 Yellowbox calibrator
pin 4 is a sensor ground and is what you are supposed to use for the Yellow box. Pin 2 the positive. on the white connector, pin 28 is the white/orange vehicle speed sensor that you should cut and intercept for the module to modify the PWM signal coming from the sensor before it goes to the ECU...- Gibz
- Post #7
- Forum: RT/10 and GTS Discussions
-
Gen 2 Yellowbox calibrator
FYI I did plan mine out but not cut wires yet- the blue wire with grey stripe should be pin#2 on the black connector, so you can do a continuity test from pin 2 to the blue/grey wire to make sure it is the right one. you can see the pin numbers next to the locations when you look at the face of...- Gibz
- Post #3
- Forum: RT/10 and GTS Discussions
-
Gen 2 Yellowbox calibrator
Ìm installing one Wednesday and I'll let you know how it goes.- Gibz
- Post #2
- Forum: RT/10 and GTS Discussions
-
Gen2 GTS hood alarm switch location?
Perfect thank you- Gibz
- Post #4
- Forum: RT/10 and GTS Discussions
-
Gen2 GTS hood alarm switch location?
hello, My GTS does not seem to have a functioning hood alarm / hood open sensor. I cannot find the location of the switch, likely removed by a previous owner during a rebuild of the front end. Can someone tell me where it should be located and shoot a picture of it for me? Also any guidance on...- Gibz
- Thread
- Replies: 5
- Forum: RT/10 and GTS Discussions
-
WTB: 96-97 GTS OEM Shift Knob
look up JohnB at viper parts rack of america. he hooked me up with a brand new one. call him if you dont see it on their website, they dont list everything.- Gibz
- Post #2
- Forum: Classifieds
-
Carlisle Chrysler Nationals 2024
I should be there with my '01 bumblebee- Gibz
- Post #4
- Forum: North Atlantic Region
-
cheap wheels/tire options for storage?
now theres an awesome idea i did not think about at all. that is perfect RAS. I will start looking!- Gibz
- Post #25
- Forum: RT/10 and GTS Discussions
-
cheap wheels/tire options for storage?
well, the requirements i listed above are for michelin pilots actually, so you are in the same boat as us continental folks, i looked up specs on both types. I remember doug demuro doing some snow drifting in his viper, does sound like fun!- Gibz
- Post #24
- Forum: RT/10 and GTS Discussions
-
cheap wheels/tire options for storage?
I give them credit. they are providing tires to us with maximum traction so we don't end up in the ditch. The "all season" type of tire compound that can handle low ambient temperatures is full of compromise that would not meet our needs. Its limited by chemistry. But I am pretty surprised its...- Gibz
- Post #21
- Forum: RT/10 and GTS Discussions
-
cheap wheels/tire options for storage?
I got feedback from my engineering acquaintance in the tire industry. here is a summary: priority is store away for UV / sunlight. store away from heat sources / close to heat. when cold, don't stack tires on top of each other don't put "any stress" on tires. this is the one that is not...- Gibz
- Post #19
- Forum: RT/10 and GTS Discussions
-
cheap wheels/tire options for storage?
thanks, hoping to bring it down soon. ive been considering poly bushings all around but havent made the jump yet.- Gibz
- Post #17
- Forum: RT/10 and GTS Discussions
-
cheap wheels/tire options for storage?
Thanks all for the comments- and the hint on the pathfinder- ill keep an eye out for those. l like the dolly design but would be good to be able to move it in/out of my garage if need be. For more background to those saying it does not matter, I found another source of information on cold...- Gibz
- Post #12
- Forum: RT/10 and GTS Discussions
