M
maverickagm
- Posts
- 14
- Reaction score
- 3
Latest activity Postings About
-
-
Mmaverickagm replied to the thread How to replace an IAC motor on a Gen 1.You can see my thread here on what I'm trying to solve...
-
Mmaverickagm replied to the thread Sometimes stalls when coming to a stop..Thanks all for your replies. I've had a busy week so I've been slow to work on this problem. I haven't touched the throttle position...
-
-
Mmaverickagm reacted to Steve-Indy's post in the thread Sometimes stalls when coming to a stop. with
Like.
Have you looked at MAP sensor? Our 95 idles at 500 rpm when fully warm on hot day with A/C off. By the way, a DRB III should work if... -
Mmaverickagm reacted to Ron Jones's post in the thread Sometimes stalls when coming to a stop. with Like.
I had similar situation with my '94. Once I resync'd the throttle bodies, problem was solved.
-
Mmaverickagm reacted to Chad Spackman's post in the thread Sometimes stalls when coming to a stop. with Like.
For my 94 if the throttle bodies are out if sync, it’ll stall when rpm is allowed to fall while coming to a stop or similar. It’ll hunt...
-
Mmaverickagm replied to the thread Sometimes stalls when coming to a stop..Thanks. It's a good point that the gauge may not be accurate. I ran across another thread where someone said the RPM reading from the...
-
Mmaverickagm reacted to 99RT10GTS's post in the thread How to replace an IAC motor on a Gen 1 with Like.
Very nice write up!! The instructions will apply to all cars 1992-mid94. The changed intakes and location of the IAC was moved to the...
-
MThe Idle Air Control (IAC) motor is on the back of the intake on the passenger side. You may be wondering if you can actually get it off...
-
-
MI have a 1993. As the title says, when coming to a stop my rpms will drop to near zero. It's even stalled a couple of times. At...
-
-
Mmaverickagm reacted to CaptainDavid's post in the thread Trying to Remove Stubborn Wiper Arms... with Like.
Also had a tough time with them, wd-40 is the answer.. Just a note to help. You do not have to unplug the wiper hoses simply temporarly...
-
Mmaverickagm posted the thread 3D print a case for an ELK-960 timed relay in RT/10 and GTS Discussions.Published here: https://www.printables.com/model/526850-elk-960-case I came across this post...
-
Mmaverickagm replied to the thread How to build a Primer Timer and cure your Viper Fuel Pump Starting Problem.For what it's worth, I made a printable ELK-960 box. https://www.printables.com/model/526850-elk-960-case
-
Mmaverickagm replied to the thread WTB Gen 1 fog light switch for a 93 RT10.Phew... I managed to find one at www.viperwizard.nl. It's incoming from The Netherlands.
-
-
Loading…
-
Loading…
