Recent content by vipergts1960

  1. V

    Who's going to VIR next week??

    I will be there. I know if 4 definites from the Virginia Beach area. See you there!
  2. V

    Archer Racing

    KUDOS to Archer Racing. I just wanted to mention the outstanding customer service I get from Archer Racing. I own a GTS and an SRT-4 that I use on road courses and anytime I can't find a technical answer locally I call Archer Racing and get an answer. On numerous occasions I have spoken to...
  3. V

    New Photoshoot with 3 Vipers and Rolling Shots

    Beautiful photos!!
  4. V

    StopTech brakes just installed; having problems

    I have Stop Techs on my 05 SRT-4 that I track and they are awesome, so once you feel good about them not leaking you will really be glad to put them on. I have thought about putting them on my 02 GTS, but I don't know if I will track it anymore. Good Luck!!
  5. V

    In car video camera question

    I bought a JVC 30 GB drive and it also has a 4 GB card as well. It shut off about every 45 seconds or so. I took my wifes camera which has a tape and it worked fine. I was hoping to be able to use something a little more modern with faster transfer speeds though.
  6. V

    In car video camera question

    I bought a video camera with a hard drive and apparently they have some sort of sensor that shuts the camera off after about 45 seconds of vibration while mounted in my car. It happened several times. Cameras with hard drives seem to be the latest and greatest, but they don't appear to work...
  7. V

    Rotary Revolution 4 Post Lift

    What is a bridge jack and where do you find them. Thanks for your help.
  8. V

    Rotary Revolution 4 Post Lift

    I was so excited to get a lift for my garage that I never noticed they don't make a bottle jack short enough to fit between the jack tray and the bottom of the car to jack it up. I am hoping someone else has already solved this problem and can give me a solution. Any help is greatly...
  9. V

    Rotary Lift by Revolution

    I spoke to someone that put a solid block of concrete under his columns and used epoxy to fasten them to the concrete floor. I will be leaving mine like it is I think. Thanks again for the feedback.
  10. V

    Rotary Lift by Revolution

    The installer came out today and with my car on the lift he adjusted the lock on the left rear column. Everything is working great now. It was a little scary at first when it happened to me. Someone recommended putting a solid block under each column to give a little more head clearance when...
  11. V

    Rotary Lift by Revolution

    I paid $3520 for the standard model, plus $550 to install. If you have the room for the XLT that is the one I would recommend. You can stand up straight under your car with the XLT from what I understand. The standard model gives you about 5'3" of headroom under the lift.
  12. V

    Rotary Lift by Revolution

    I wasn't holding the lock disengage handle in the vertical position. I pulled the car on it for the first time and raised it all the way up. From there I tried to lower it down on a lock to store it up there. That is how I understand I was suppose to do it when you raise the car. The problem...
  13. V

    Rotary Lift by Revolution

    I did raise it all the way up, but when I tried to lower it onto the lock position, the runway didn't come down at the left rear corner causing the car to start tilting with the lift. I am hoping it is something simple like yours. It seems like a great product. Did you fasten yours to the...
  14. V

    Rotary Lift by Revolution

    I received and had my Rotary lift installed today. So far, I have chosen not to bolt it down. I am not sure that was the best decision so I will probably end up bolting it down. I put my Viper on it for the first time tonight and a scary thing happened. I raised the car all the way up. The...
  15. V

    Revolution Lifts

    I like your tile floor. What is it and how does it hold up? Your garage looks great.
See more

Latest posts

Members online

Total: 841 (members: 8, guests: 833)

Forum statistics

Threads
153,218
Posts
1,682,055
Members
17,713
Latest member
webironmongery

Share this page

Top