W
Walter Clark
- Posts
- 25
- Reaction score
- 4
Latest activity Postings About
-
-
WWalter Clark replied to the thread Sourcing Obsolete Parts For Gen I and Gen II Vipers.Gen 1 Clutch slave cylinder. There is a thread dedicated to this already, but as this is a sticky thread, it might be easier to find...
-
-
WWalter Clark replied to the thread New Owner Gen 1 - Kind of..My '94 has a snowflake where that little button on yours is located. I assume it is for the optional AC (I dont have AC).
-
WJust a little info in case this happens to anybody else, I found new wiper motors from https://www.viperpartsusa.com/. The only problem...
-
WWalter Clark replied to the thread Are the side exhaust covers insulated from the factory?.It wasnt immediately obvious to me that they were trimmed, but the metal should be easily cut by airplane shears / tin snips if needed.
-
WWalter Clark replied to the thread Are the side exhaust covers insulated from the factory?.That makes sense. I took a look at the '05 and '06 parts catalogs and the heat shields drawn in the Exhaust section could be what I...
-
-
WWalter Clark replied to the thread Are the side exhaust covers insulated from the factory?.Mine are different than the kit in the picture. The 2 differences are that mine dont wrap around the exhaust, they are formed then...
-
WWalter Clark posted the thread Are the side exhaust covers insulated from the factory? in RT/10 and GTS Discussions.My '94 has a pair of heat shields consisting of a white insulating blanket sandwiched between 2 layers of thin stainless steel that was...
-
WWalter Clark replied to the thread Front Chin bumper scraping problem.My '94 had that problem in spades. It seems a previous owner put in shorter springs and I had very little front fascia and side exhaust...
-
-
WThe Reid site is me. I have a significant amount of poly engine (and trans) mounts in stock and highly suggest the combo. They prevent...
-
WWalter Clark replied to the thread Stock motor mounts, Gen 1.Thanks, I think I am good. The new OEM drivers side mount was fine and works well. It is the passenger side replacement that has been...
-
WWalter Clark replied to the thread Stock motor mounts, Gen 1.I bought another mount from a Dodge dealers online parts sales through eBay. Received it yesterday. Exact same mount with the wrong...
-
-
WWalter Clark replied to the thread Stock motor mounts, Gen 1.The stock mounting puts the fingers facing forward. That allows the 3-sided heat shield to follow the exhaust manifold which comes down...
-
WWalter Clark replied to the thread Stock motor mounts, Gen 1.That last post of mine is probably a little hard to follow, but in this world of diminishing Viper parts supplies might still be useful...
-
-
WWalter Clark replied to the thread Stock motor mounts, Gen 1.The replacements didnt go exactly to plan. First, From everything I can see, these are both OEM parts. Both the stick-on part labels...
-
WWow, good thing you did. Not much left of that one at all.
-
-
Loading…
-
Loading…
