According to the service manual C1-6 is the wire you want but it does not show the pin out on the amp? From the radio it is pin 13 which is the second from the left on the bottom row if your looking at the radio? Hope this helps I will look at the manual for my 08 also:dunno:
Shows to be...
Hey Alan
Glad you got your car back I told you Mark would take good care of you! I was thinking about adding the A/F ratio gauge to mine What did the boost gauge show at redline?
I have the off road PCM installed with headers on my 08 that I use for track events. If I put the factory PCM back on do you think the car will pass a state emissions test that uses the OBDII connector?
It says in the instructions 20 to 30 miles. Mine seamed fine after about 10 or 15 miles. Did you install it or the dealer? It says the electronic throttle control (ETC) system requires ETC relearn procudure to be performed when installed. This porcedure checks the accelerator pedal position...
Paxton lacking..I like that term! It has just a little bit of gear noise at idle but faster than that you really can't hear it. When the engine hits about 3000 rpm it starts pulling pretty good by the time it's at 5000 rpm it feels as good as my 08 with headers pcm and 3.55 gears or maybe...
I couldn't agree more Mark and his people are very good at what they do..... and do what they say! That is something that is hard to find these days! Thanks again Mark I love the mods you did to both of my cars.:headbang::2tu:
I just got my 05 Vert back from Mark at Woodhouse with a new Paxton on it:headbang: Had to take it out for a little spin this afternoon and I'll tell you what...that thing runs like a cat on a tin roof!:2tu: I can't say enough about the professional installation that they did. I was a little...
I just got my 05 Vert back from Mark at Woodhouse with a new Paxton on it:headbang: Had to take it out for a little spin this afternoon and I'll tell you what...that thing runs like a cat on a tin roof!:2tu: I can't say enough about the professional installation that they did. I was a little...
Thanks Mark, you make it fun to have work done on a car. I own a service business and know how hard it is to give really good customer service and you do it well my friend! I can't wait to see the 05...it's supposed to be here around lunch time! I'll post up which is faster a moded 08 or a S/C...
DRAINING COOLING
SYSTEM
WARNING: DO NOT REMOVE ENGINE BLOCK
DRAIN PLUGS, COOLANT PRESSURE BOTTLE
CAP, OR OPEN THE RADIATOR DRAINCOCK,
WHEN THE COOLING SYSTEM IS HOT AND UNDER
PRESSURE BECAUSE SERIOUS BURNS FROM
COOLANT CAN OCCUR.
When servicing the cooling system, it is essential
that...
That means that the tire had a nail in it but was not driven with low air pressure? I found the nail when I had the wheel off the car and it still had 29 PSI in the tire. It's my understanding that if the tire is run with no or low pressure for any length of time then it needs to be replaced?:dunno:
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.