Search results

  1. D

    Question on how to flush coolant on a 96 GTS

    use a replacement drain-**** for the radiator plug. Airlift works great for getting the air out of the system.
  2. D

    GENI & II OEM "like" Radiator Replacement Option

    I have had mixed experiences with aftermarket radiators, aluminum radiators tend to 'flex" with the chassis of the car and develop leaks where the core meets the tank. I have rubber mounted some of the radiators at the top, which seems to help. Aluminum radiators seem more susceptible to...
  3. D

    Are spacers required if lowering SRT Coupe

    No wheel spacers are not needed.
  4. D

    I have had enough with these battery/charging system issues

    If you have excessive draw from the EEM first check to make sure the hood and hatch switches are properly adjusted. If not the EEM never times out.
  5. D

    Oh boy, got some problems!

    Eddie is the best, he will get you sorted out.
  6. D

    Proud new owner with questions of course

    Its funny, I have dealt with many lubricants over the years and what is good for one car many not be good for another. Believe it or not Mopar has done a fairly good job with its lubricants. Some race lubricants are good for racecars but not for streetcars. I have been a victim of "snake oils"...
  7. D

    Racing seat belts for '94

    I will find some old templates and PM you.
  8. D

    Gen 3 to Gen 4 Differences

    Fuel pump and power steering pump differ from 03-06 model.
  9. D

    Proud new owner with questions of course

    Use 10w30 or 15w50 if you track. 0w40 is for the later cars.
  10. D

    How often should Tranny fluid be changed on semi-monthly track car.

    If you run more than 30 minute sessions that ATF can get too hot. It does shift better with the thinner fluid though. Take a fluid sample, if the ATF is turning brown then it needs to be changed. With three track events I would change it out. The later cars used Syntorque, it is a thicker fluid...
  11. D

    Sign up here for Website/Forum Meet and Greet

    I will be there.
  12. D

    Front end pop, what could it be?

    90% of the time this is the ball joints. They wont show any sign of play and lubing them does not seem to help. When they are removed and inspected there is a ridge on the ball surface. Replace them on the side that makes the noise and you will be fine.
  13. D

    Need Header Recommendations

    For the street on a Gen 2 the Belanger most likely will give you the best midrange power. Best usable power for the street. I you are running a big cam I would go with the merge header like the ARH or B and B.
  14. D

    2008 Coupe Brakes: Stoptech AeroRotor DRK vs. OEM 2008-2010 ACR Rotor

    If you track your car hard then I have found the Brembo Rotor and Hat combination will cool better and last longer under extreme conditons. These rotors will save you 7pds per wheel, which is a pound more than the ST's, so they cool better with less mass. They are a little less than double the...
  15. D

    My car, APR and jackstands

    Good luck with your issue. I have found the APR guys to be honest and reliable. I've always worked with Peter and he has always worked hard to resolve any issue I have had. Sorry to hear about your problem I am sure they will come through.
  16. D

    Can't calibrate a speedometer with a SCT?

    The PCM/ send me a pm and I will forward you to the right place.
  17. D

    Can't calibrate a speedometer with a SCT?

    I have done this numerous times on 1996-2002 Vipers. Just need your controller.
  18. D

    '08 Tuning

    Very good points. Besides the Mopar controller there really is no reliable "power adding calibration" for the 08-10 models. The only time where calibration work is needed is when the engine is modifed. Cam changes, superchargers and turbochargers require a new programmable engine management system.
  19. D

    Viper Car Cover... Which one...?

    California Car Cover sells a cloth cover with a soft felt type lining on the inside. Its a very durable cover and breathes well. I use it on cars that I need to store outside overnight. It is not good for wet weather. I like it because its soft, wears well, washes well and is really easy on the...
  20. D

    Ideas on possible fuel system upgrade

    You will want to make a fuel basket and have a dedicated pump that fills the basket to supply the pumps.
  21. D

    Ideas on possible fuel system upgrade

    The earlier pump has the fuel filler breather hose routed into the top of the module. The later cars had the breather hose routed into the top of fuel tank. One important point to consider that Chris mentioned earlier, the pump has a dual function, one is to fill the pump bucket and the other is...
  22. D

    replaced roller lifters with dc lifters still have a barking noise after warmed up??

    Re: replaced roller lifters with dc lifters still have a barking noise after warmed u Hey Bob, Give me a call, it can be difficult to explain a noise. here to help. Dan 310-597-6295
  23. D

    Camber adjustment bolts

    This is pretty common, more so on track cars that have many alignments done. You might consider changing to shims like we use on the race cars (Comp Coupe and ACRX). They are sold by Dodge Motorsports and most likely available through the VPA.
  24. D

    Where to buy huge cam???

    For a Gen 1, these cars work well up to about 550hp, past the brakes and driveline does not work well without modifications. The geometry and weight of the suspension does not lend well to lots of torque, so a hp balance is good. Stock the Gen 1 puts out about 360 to the wheels, 500rwhp is the...
  25. D

    New AEM Infinity 10 ecu?!

    There are many new systems on the market, as Dan has stated, integration is the biggest factor. Many thing things need to be considered when making the jump to a new engine management system. First off these systems will not pass any emission test and should not be considered for any build that...

Latest posts

Staff online

Members online

Total: 1,001 (members: 9, guests: 992)

Forum statistics

Threads
153,839
Posts
1,686,669
Members
18,448
Latest member
JpKL

Share this page

Top