Search results
-
T
For Those Who Have Not Seen a Carbon Fiber Drive Shaft
Very cool. Do you mind me asking how much?- Tail lights
- Post #2
- Forum: SRT10 and SRT10 Coupe Discussions
-
T
Running 335's up Front on my 2001
Very cool, let's see some pictures, what size rims, and does it still push( understeer),- Tail lights
- Post #4
- Forum: RT/10 and GTS Discussions
-
T
Tire size
I'm responding a couple of months late in response to a couple comments, about my autocross win by 3 seconds. this was not an scca event by any means. just the local washington viper club event. I went from 8 year old pilot sports( not ps2's) to the brand new heat cycled 315's & 345's. also I...- Tail lights
- Post #13
- Forum: Tire , Wheel, Brake and Suspension
-
T
Somone help me with my list of simple mods for my new car. Need some approval
Larger throttle bodies are a big mistake, They don't make even 1 more horsepower than stock Throttle bodies. And between 2,500 and 3,000 rpm they create a big lean hole, What I would recommend is a set a harlan and sharp 1.7 rocker arms( Get them on ebay). I just got my engine off an engine dyno...- Tail lights
- Post #7
- Forum: RT/10 and GTS Discussions
-
T
Anyone have OZ Racing Challenge Wheels?
Heat, one more thing, There's a choice of rear tires In the A6's, I chose the taller ones because I have 4.10's in the back end. the rear tires are so sticky when excellerating around corners in first and second, the clutch type posi in the rear end does what it is supposed to do and locks both...- Tail lights
- Post #8
- Forum: RT/10 and GTS Discussions
-
T
Anyone have OZ Racing Challenge Wheels?
Heat, I don't have any photos of my genII With the OZ's on , My street setup is back on .Otherwise I'd be glad to share photos, The tires I purchased were the A6's. They stick like glue. First time out was my first autocross win. If I can help you in any other way. Just ask.- Tail lights
- Post #7
- Forum: RT/10 and GTS Discussions
-
T
Anyone have OZ Racing Challenge Wheels?
Oops , a little mistakeback 315 30s on the front. if that matters.- Tail lights
- Post #4
- Forum: RT/10 and GTS Discussions
-
T
Anyone have OZ Racing Challenge Wheels?
I've got a set with 345 35's on the back,315 35's on the front. on a lowered 2001 GTS. They don't stick out it all and I have no rubbing issues You know the front rims are 1 inche wider than stock. By my measurements,1/4 Inch wider to the outside,3/4 to the inside. I purchased mine from tire...- Tail lights
- Post #3
- Forum: RT/10 and GTS Discussions
-
T
Razors to Sidewinders
Now your car looks like a race car. I can't believe they put polished wheels on a viper. I think they were trying to appeal to the chevy crowd.- Tail lights
- Post #23
- Forum: SRT10 and SRT10 Coupe Discussions
-
T
Dry sump
I'm in the middle of dry sumping my gen II right now.All viper dry some systems I've seen have 5 stages, 4 scavenge and 1 pressure, All scavenge pumps suck from the pan, You don't need to suck out the heads. As far as capacity goes 4 to 5 gallons is the norm. I'm just curious what pan are you...- Tail lights
- Post #2
- Forum: Performance Modifications
-
T
Suspension Help
No and no, but a toe-in alignment is required after. also pay attention to the 2 bolts that hold the to link to the frame, The outboard mounting hole of the link, is slotted for up and down adjustment . Mount the new 1 in the exact same spot, Then get a good toe adjustment,and thrust alignment...- Tail lights
- Post #2
- Forum: SRT10 and SRT10 Coupe Discussions
-
T
Catback hp gains??
On my 2001 gts, I installed corsa larger diameter(3inch as opposed to there 2 -1/2 inch system) cat back. Then I installed a set of ARH headers, I remove my cats completely. Now it's 3 inch front to back. My car definitely has more midrange grunt, But on the dyno, No increase in power. I'm...- Tail lights
- Post #5
- Forum: SRT10 and SRT10 Coupe Discussions
-
T
Roe Racing parts best value/quality for money?
Roe is great, I'm really glad there around.- Tail lights
- Post #12
- Forum: RT/10 and GTS Discussions
-
T
Anyone Use 3.73 Gears at the Strip
I'm in the process of switching from 4.10 to 3.7. I think you be up against the rev limiter before you get 130. I'm planning on going about 125 in a quarter With about 500 Rear wheel horsepower.- Tail lights
- Post #2
- Forum: RT/10 and GTS Discussions
-
T
Get gaers put in this Friday need help on ratio
Top speed with 4.10's in fourth is 117, 3.7's will go about 128.- Tail lights
- Post #20
- Forum: RT/10 and GTS Discussions
-
T
Get gaers put in this Friday need help on ratio
I just took out 4.10's and put in 3.7s. 4.10s are definitely too steep. I went to 3.7s so I could make it through the quarter mile in forth.- Tail lights
- Post #17
- Forum: RT/10 and GTS Discussions
-
T
Transmission Gear Oil - Interesting Report
I wouldn't trust amzoil at all, their products don't perform as advertised, I don't want to stereotype them, but I've personally caught some of their employees being totally dishonest, personally I can't trust them anymore.- Tail lights
- Post #5
- Forum: RT/10 and GTS Discussions
-
T
For Drag racing at a track, what RPM do you launch at?
Try dropping the clutch at 2500 and flooring it. Ajust up or down depending on wheels spin. If your car wheel hops,you will have to slip the clutch off the line. Your shooting for a big squeak off the line and acellerating through first without wheelspin.Good luck.- Tail lights
- Post #2
- Forum: General Viper Discussion
-
T
Almost There....
I have one of each,gen ll's seem so hard core, I love it. the genlV seems almost plush, it's soft and leans over a lot. the gen ll is scary in the rain.The gen lV feels completely safe and sane- Tail lights
- Post #13
- Forum: General Viper Discussion
-
T
Tire size
I purchased mine from tire rack, mounted balanced and heat cycled- Tail lights
- Post #7
- Forum: Tire , Wheel, Brake and Suspension
-
T
Tire size
The OZ's are 1 inch wider in the front ,I run 315 30's and335 35's. absolutely no rubbing issues even when lowered.- Tail lights
- Post #6
- Forum: Tire , Wheel, Brake and Suspension
-
T
Tire size
This last summer I purchased a set of OZ's And hosiers for autocrossing my gen 2.( also a set of sway bars) I went from consistently placing about 10th to finally coming in first by 3 seconds. ozzy's are 1 inch wider in the front- Tail lights
- Post #5
- Forum: Tire , Wheel, Brake and Suspension
-
T
ACR-X Racetech Seat install
I have a gen 2 viper, I bought my mounts from 425 motorsports, A big part of their company is custom seat and brackets Dan Reiss is the ceo, And is very cool to work with.425 747 0777, Make sure to tell 'em if you're running a 5 or 6 point harness. And which generation viper you have. Tell him...- Tail lights
- Post #5
- Forum: SRT10 and SRT10 Coupe Discussions
-
T
Vid of comp coupe cam on my 03
Nice, Your car sounds really good, Do you have any specifications on that new bumpstick, how does it compare to the 708- Tail lights
- Post #2
- Forum: Performance Modifications
-
T
Just Wrecked My Dream Car
The best way to get over something like that is to get another viper ASAP- Tail lights
- Post #58
- Forum: RT/10 and GTS Discussions
