Search results

  1. H

    First Time Viper Owner- Hennessey 500

    buy a viper because it is a viper, I went to the dealers site and looked at the pics and read the write up. was not trying to one up anyone, from what is shown and from descriptions given the following seems to be missing 1) exterior badging 2) airbox is stock with k&n sticker, this does not...
  2. H

    First Time Viper Owner- Hennessey 500

    I am excited for any one who buys a viper, the gen 2 gts is a great car and he got it at a fair price, but he should be aware of older Hennessey "upgrades", valvetrain fortifications means what? like any used car it should be gone over not just by a mechanic from the dealer but by the individual...
  3. H

    First Time Viper Owner- Hennessey 500

    i stand by my comments about Hennessey products and upgrades, his reputation for poor service is well known, 10 g for 60 hp gain is insane, k&n with smooth tubes by itself will pretty well do the same thing for 500 bucks, for 10 g I would of course spent toward roe merchandise or chuck or...
  4. H

    First Time Viper Owner- Hennessey 500

    or look for the crayon and happy meal gift certificates, got a magic marker and anyone can have a hennessey
  5. H

    2000 Viper RT/10 Windshield Replacement cost with Labor

    just over 600 for the shield, vpa has them as well, plus a couple hrs labour,1685 is way too high, plus I live in Canada where the viper tax is HHHUUUUGGGGEEE on parts
  6. H

    2000 Viper RT/10 Windshield Replacement cost with Labor

    for my 97 gts including taxes the total was 907, cept it took a month to get the shield
  7. H

    First Time Viper Owner- Hennessey 500

    dump the Hennessey crap and get a real roe kit instead, Hennessey is a sticker and some flea market add ons, probably just a k&n filter with stickers, standard ebay upgrade
  8. H

    Viper Crash in Prince George (Unfit for the road citation)

    loose gravel from continuous road work in prince George pot hole hell, had to slalom down central street to avoid bottoming out, plus the stray moose and chug a lugs and only a 4x4 viper conversion could of saved u,
  9. H

    Long term adaptive high?

    am catless with headers/porting etc, found that removing the smooth tubes and going back to stock intake removed some exhaust smell and toned down the rumble, think the turbulence in the intake leaned it out a bit
  10. H

    New Exhaust

    took about a day to blow all the packing out off my borlas, new cans have no packing no more borla stamped cans for me
  11. H

    Gen 2 RT/10 radio bezels

    rear fog switch on gts/acr model, but will not fit 96,97 gts without rewiring new switches:(
  12. H

    Support hatch glass when out of car?

    getting tired of repairing gts glass, a nice lexan kit would be good cept no defrost
  13. H

    Help!! Wheel hop, car dead

    just did the 02 on the right side cause it was crispy with the headers, the bosch units were better priced new and had a better protective sleeve, but still ran 1" heat protective loom overtop the entire assembly(about 2 feet) and tied it up higher so it never happens again, could wrap the...
  14. H

    For the Stereo Buffs among You...

    stereo delete, then fill the doors with dynomat, side pipe are all the music u really need anyway, then put in a pocket where the stereo was, no more clutter and I can chuck my iphone in the pocket
  15. H

    Anyone have issues with 345/30/19's???

    yah 19's don't fit on my bbs 18's, would like to go 19 back 18 front but I can live with existing bbs for now, unless they want too much to refinish them this winter
  16. H

    Gen 2 dash bulb list

    a pain finding a led for the overhead console lights, shoulder is to big
  17. H

    water pump for 2000 gts

    just replaced the right front o2 sensor and noticed the wires were crispy, replaced and slid some 1 inch thermal loom over the sensor past the connector(about a two foot piece) and tied it out of the way, noticed some other crispy plastic parts, but did wrap my side pipes on top of the factory...
  18. H

    Nightmare clutch... HELP... !

    plus viper tax
  19. H

    I need a set of Forgelines like these - 18x10

    or sell those and go 19rear 18front
  20. H

    Time for a color change

    could save a whack of dough by stripping the car urself, pulled the facsia and sills off and took em in, buddy based and coated for 400, when I painted the door, I stripped it down so the shop tard would not screw up the seals or dynomat, needed a new windshield so redid the roof with the door...
  21. H

    Customer Issue... am I out of line?

    don't forget that the reason you are in business is to make money, friends should come to you not for deals, they should come to you for quality and service, no deals for cash garbage
  22. H

    Clutch Swap

    sourced out new fidenza flywheel, slave and clutch over winter months and just had them installed, screw the "floor it" and if it does not slip its good, mine was holding good but almost worn down to rivets, the flywheel was a no brainer as they were already in their so a few bolts in and out...
  23. H

    Customer Issue... am I out of line?

    document everything religiously as part of your due diligence, I was in business for 12 years and was immaculate on everything until I got that one "tard" customer about 2 years in, after that I realized there were a and b customers the c and d were not worth it, the customer is not always right...
  24. H

    Neep help changing gascap cover

    probably an older corvette or ford cover
  25. H

    Speedo working but odometer and trip not...

    about as bad as when I wanted to change my guage faces on my 1400 mile gts cause I read it was soooooo easy to do, realized after prying apart the housing how crappy it looked so bought a used guage off viper larry that he said had only 1200 miles cept when it came it had 12000 instead, oops he...
Top