Search results

  1. M

    May be time for new exhaust

    I like the complete Belanger setup. Not too loud and not too quiet. Just right!
  2. M

    MCS new product poll

    Do the stock forks fit the shocks??
  3. M

    MCS new product poll

    For the Gen II is the rear forks the only difference?
  4. M

    Insurance for Viper as primary vehicle?

    Allstate here, however my Viper is not my dd.
  5. M

    sway bar end links removal?

    The links are in the way to get the lower shock bolts out.
  6. M

    Kentucky Speedway track day?

    Sounds like fun!! We have a club meeting today in Louisville at noon. Might be able to hit it after the meeting, however you guys will most likely be done before we could get there.
  7. M

    sway bar end links removal?

    Here you go. http://www.harborfreight.com/3-4-quarter-inch-forged-ball-point-joint-separator-99849.html It works for both ends on the front and only on the sway bar end on the rear. I did open up the width of the slot just a little bit to get a better fit with a small die grinder.
  8. M

    sway bar end links removal?

    Harbor Freight sells a tool the works perfect for this. Do a search, I put the info in another post a few weeks ago.
  9. M

    Kentucky Speedway track day?

    I haven't heard about it either. Most likely interested. Need details please!!
  10. M

    IN/KY VCA Mtg, NOON EDT Sat, Apr.13, 2013...KingFish @ Zorn, Louisville,KY...

    Thanks Stretch!!
  11. M

    IN/KY VCA Mtg, NOON EDT Sat, Apr.13, 2013...KingFish @ Zorn, Louisville,KY...

    We were thinking about it if someone can confirm it is still active.
  12. M

    Gen1,1st gear

    My Gen II with stock gears and stock wheels and PS2 tires does 118 in 3rd in a 1/4 mile pass and just bumps the rev limiter. At least that is what the time slips show.
  13. M

    Vibration "changed" with new motor mounts

    I've installed the Woodhouse mounts on my Gen II GTS. (All 3) No issues installing like some people have had and no noticeable increase in vibration. I also have installed the billet cross member. Now the shifter really doesn't move at all when on and off the throttle. Huge difference for the...
  14. M

    Ralph showed up @ Indy C&C with a Gen V today...

    At least you got a call!!:)
  15. M

    How to tell what half-shaft I have

    Both have stickers, the black one is dated Jan 98, I didn't see a date on the unpainted one. Both stickers have what appears to be part numbers on them.
  16. M

    IPod with the Stock Alpine head unit on GTS

    What about the on off power switch? What did you do with it?
  17. M

    How to tell what half-shaft I have

    My 98 GTS looks the same as you describe except I think they both have stickers. I will look later today.
  18. M

    New u-joints, or bite the bullet and buy unitrax half shafts.

    You are welcome. Good Luck!!
  19. M

    New u-joints, or bite the bullet and buy unitrax half shafts.

    I used a 1/4" drive socket with a wobbler extension. Then used a 3/8 drive torque wrench with a 3/8 to 1/4 adapter. The pictures show a 1/4 ratchet. I had already returned the torque wrench to my other shop.
  20. M

    Penske Coilovers Wanted

    Looking for a set of Penske coilovers for a Gen II.
  21. M

    IPod with the Stock Alpine head unit on GTS

    Thanks, I just ordered one from Amazon. $45.26
  22. M

    New u-joints, or bite the bullet and buy unitrax half shafts.

    You may want to consider new bolts and straps.
  23. M

    caap pics ?

    These are from my phone. My buddy has a high end camera. I'll get those tomorrow and post them tomorrow night.
  24. M

    caap pics ?

  25. M

    caap pics ?

Latest posts

Members online

Total: 916 (members: 5, guests: 911)

Forum statistics

Threads
153,836
Posts
1,686,656
Members
18,447
Latest member
naimsito

Share this page

Top