Search results

  1. G

    Gen 4s.

    I have seen some of these low priced vipers on a lift. The owners always act so surprised when you tell them it has been hit or damaged. You get what you pay for.
  2. G

    Rearend noise in 08 ACR when turning right

    Get the car hot, go to an empty parking lot and do low speed circles. If the noise becomes really bad it is more then Likely the clutches in the diff making the noise. Either the fluid has broken down or the clutches are damaged.
  3. G

    Alarm on please

    What year? What area do you live in? You need someone with a scan tool Garrett
  4. G

    Gen 3 Service Manual Fluids Questions

    You should just look at the condition of the fluid. I find the clutch fluid turns black the fastest followed by the rear diff fluid Garrett
  5. G

    Motor Mounts ???

    Stock mounts do have some movement. You have to check for cracks in the mounts to see if they are starting to fail, you can see them from under the car. I had nothing wrong with the mounts on my car and after I upgraded to woodhouse mounts everything felt better. Even when you come out of a...
  6. G

    2009 ACR won't start after Radio/GPS replacement

    Already had a radio take the bus down and cause a no start. On a Canadian car the computer network or bus needs to tell everything it is okay to start the vehicle. Ps: also replaced a radio for no am. So you may want to check that rw99
  7. G

    Need help!!! Body shop is screwing with me I think.

    This vehicle is now at my dealership, we were not the ones to paint or do the work on the bumper. I had the body shop manager look at the bumper. This is what he said: If this is an OEM bumper I would not have accepted it from parts, I would just send it back. If we get a fender or bumper we...
  8. G

    Emissions sytem warranty (specifically cats)

    Pm me the vin and the mileage showing exactly and I will tell you.
  9. G

    Emissions sytem warranty (specifically cats)

    It is mileage and time based. Get a dealer to run the vin.
  10. G

    Installing daytime running lights

    The last Ontario member who had Canadian tire install that unit ended up with the wiring getting wrapped around the steering shaft, which in turn pulled a plug wire off, which in turn overheated the cat. I posted the comments below in your other thread, but I will post it here as well, It...
  11. G

    new clutch time, any recommandations?

    Service manual says not to resurface. Lots of guys still do, never heard of anything bad happening.
  12. G

    Bought a GTS. Can any Canadians help me with importing advice.

    Running lights are easy. Buy the real Chrysler day daytime module the part number is 04672271. The wiring plug is already there just plug it in to the module and bolt the module down with two bolts 06102132AA. Do not jump things in the fuse box as a cheap "free" daytime lights kit. The fuse...
  13. G

    Do you find the greaseable ball joints annoying?

    Most guys over grease the joints and make a mess. If you look at the owners manual it recommends every 15'000 miles grease the joints for a gen 3. If you are hard on the vehicle and find it is melting out of the joint I find it is not as bad if you start replacing it with a high heat grease.
  14. G

    Shipping wheels/tires to CalChrome

    Fed ex actually lost a rear rim on me. I was shipping from Canada to California, the tracking number shows it went missing in Boston. I found a used one for $900 and everything turned out okay in the end. But it is a fight to get money out of them, they spent a month looking for it before they...
  15. G

    which oil filter people liking now-a-days ?

    WRONG WRONG WRONG 5037836AA is the Mopar performance filter for the 1992 - 2006 viper (says viper on it) 5038041AA is the Mopar performance filter for the 2008 - 2010 viper (says SRT on it) They DO NOT supersed into each other They are the same filter except 5037836AA has standard...
  16. G

    Anaconda Green

    Anaconda never really took off. SSG has so much more depth and almost changes color in the sun.
  17. G

    What would you like to see as the NEW Engine for the Gen V Viper?

    I am willing to bet there will be slight changes to the current motor. (still passes emissions and really a great motor) Personally I would like to see the viper beat the corvette horsepower numbers with a N/A motor.
  18. G

    Check Engine Light P0141 and P0161 Faults

    Many of my Belanger owners upgrade to Woodhouse mounts. It limits the movement of the engine. A header does not have a flex pipe like the stock exhaust. If the engine goes up and down so does the piping. The oxygen sensor can sometimes hit and rub through the sock. All these cars are different...
  19. G

    how to get engine lite off????

    Light will go off by itself after three warm up and cool downs. If the problem happens again it will stay on.
  20. G

    2010 Door Molding Problem

    I have same molding new still in the bag with the same hole. I thought it was a vent for air.
  21. G

    Cracked headers / manifolds

    They crack under a heat sheild.
  22. G

    Oil Leak

    Hey guys, I have had great results using a light coat of mopar anaerobic sealer on the pan gasket. A very short lesson, an example aerobic sealer is black silicone. Excess sealer can enter the inside of the pan and block oil ports and the pick up. anaerobic will only harden without oxygen and...
  23. G

    Gen 4 track issue with panel

    Use the plastic rivets, look clean and you can get them off with a center punch http://t3.gstatic.com/images?q=tbn:ANd9GcThp2-B_cMewfn2yt39c8Nwe1G0-HBnVvLQ6CoDdfKXw_xexz_S
  24. G

    Yet Another Alarm Problem

    First you can use the ignition key cylinder on the outside of the drivers door, under the drivers side mirror to shut the alarm off. the system looks at the following: vehicle doors, hood, trunk and ignition action for unauthorized operation It is possible to have a bad BCM turning the...
  25. G

    Hitting rev limiter at 5500 rpm?

    There is a well known bulletin to update the engine computer on the 2008. SUBJECT: Flash: MIL Illumination with DTC P0300 - Multiple Cylinder Misfire Set. Special Flash Procedure Must Be Followed OVERVIEW: This bulletin involves selectively erasing and reprogramming the Powertrain...

Latest posts

Members online

Total: 916 (members: 5, guests: 911)

Forum statistics

Threads
153,839
Posts
1,686,670
Members
18,448
Latest member
JpKL

Share this page

Top