Search results

  1. J

    another headlight question

    Any ideas on how to adjust them up more?
  2. J

    another headlight question

    Digging up an old thread... I've adjusted my headlights all the way up but to me they still look a little low? Is the light beam suppose to shine this much on the housing? It just seems like the projector lense is set to low??? ^^^ To me the lenses looks to low in the housing?
  3. J

    Gen 2 Shift Light Q's

    Are you wanting a shift light, or a gear shift indicator?
  4. J

    Doing viper brakes for teh first time....

    How are people mounting their SS brake lines in the front? I have issues with rubbing and binding with the zip ties.
  5. J

    Roe Stainless steel brake lines 94 install

    Any help on this? I still need to do mine. Thanks!
  6. J

    Roe Stainless steel brake lines 94 install

    I am having a difficult time trying to secure my brake lines. I have Dave's kit with SS lines from Partrack. I have 20's in the front but I run into issues with the lines rubbing the inside of the wheel or pulling them to tight when turning. I plan to lower the car an inch so will it get...
  7. J

    Best Floor Mats

    I bought some black Lloyd mats for my Dodge Ram with the Fangs logo on them but I have never used them. Very high quality and I now I just need to sell them. You can have them put anything you want on the mats.
  8. J

    Peel and stick stainless trim

    Use fishing line to remove the trim. Heat will also help.
  9. J

    headlight restoration

    Can you take them apart to get to the inside?
  10. J

    Audio battery adapter?

    Yes you can drill a few small holes in that area like Dave said. Just becareful not to go to far. If you remove the taillights you might have enough room to get a wrench in there and tighten down a bolt from either direction, but it will be tough. Here is a picture of a Viper without the body.
  11. J

    headlight restoration

    That's how I did mine. I need to fine sand it some more to remove some fine scratches but it's a lot better than what it used to be. I also removed the letters as well. :2tu:
  12. J

    Personalized Plate

    If it was one of my friends it would be Live on Credit... :lmao:
  13. J

    I need a set of Gen 2 Viper Gauges

    Make up your mind... :rolaugh:
  14. J

    I need a set of Gen 2 Viper Gauges

    I don't know if this helps, but here is a close up of one of the small gauges. My advice if you remove any of your gauges, is to trace around the mounting bracket onto the plastic with a sharpie so you can line it up when you go to put them back in. It's a pita otherwise.
  15. J

    Popping sound when turning?

    Okay I've got the stud changed out and the coilover tighten. Now whenever I spin the wheel it has a slight "ticking" sound when it rotates? It almost sounds like I'm watching Wheel of Fortune... Any ideas on what is making the sound now?
  16. J

    Viper Registry.Org?

    I've looked for mine which is a 2000 ACR solid red with all black interior and I found it was one of 39, but I've also been told it's one of 35 and then one of 18?
  17. J

    Viper/Challenger Photoshoot

    I should have went to college... :(
  18. J

    LED Tail lights ????

    Dome is 1 pair. License plate is 1 pair which is 168 bulb type. 2 pair of (74) for small dash gauges 2 V-LEDS 3 SMT HID WHITE WEDGE BASE DASH LIGHT BULBS 37 74 Speedo and tach 1 pair I think... 2 WHITE 5K SMT HIGH POWER LED LIGHT BULBS 194 168 158 2821 I picked everything as "Pure...
  19. J

    LED Tail lights ????

    Thanks! I've spent enough money with them over the years I like to help others out when I find a good product with even better customer service! If you "like" them on Facebook you can get discount codes to save anywhere from 10-25% off at different times. I had to trouble shot when I...
  20. J

    LED Tail lights ????

    Pictures don't do it justice! You won't regret buying them IF you want more light! ;) V-LEDS HID 5K WHITE 4 M-SMT 2W HIGH POWER BULBS 194 168 158 They also have a Viper :)
  21. J

    air ride anyone???

    I really doubt there is a kit for any Viper. You will most likely have to piece it all together to make it work. It can be done, but I would be worried about the bags when it comes to torque and handling etc. I'm anti-bags because in the (i hate this term) "Mini truck" scene everything is...
  22. J

    Squeally Brakes

    I put on new rotors and Hawk pads, and mine squeal like crazy. I have about 500 on the new brakes. I haven't done the fast and hard braking as of yet, hopefully that will help?
  23. J

    LED Tail lights ????

    Yes, since they look cheap I added the clear marker lenses from Klearz and I added a flat amber LED. Before I installed them, I sanded down the housing so I could recess/flat mount the new lense with the body. I was able to suck in the lense about 1/8", by doing that a flat LED is the only light...
  24. J

    LED Tail lights ????

    Well said! Even though LED's are pricey I think you get your money's worth in the long run. My Viper is lit up at night in a classy and stylish way and I think it enhances the overall look and quality. I don't think it's "rice" or cheap looking when you do it right. Now if I had...
  25. J

    LED Tail lights ????

    Since I changed out every bulb that I could with LED's I had to cut and splice 6 diodes for the taillights :omg: It's not a huge ordeal but it might not be something that everyone wants to do. The only reason why I had to do this was for a backfeeding issue. When I added leds to my front...

Latest posts

Members online

Total: 1,009 (members: 4, guests: 1,005)

Forum statistics

Threads
153,839
Posts
1,686,670
Members
18,450
Latest member
Bcanfield

Share this page

Top