Search results

  1. 2

    Lowering springs and caps

    Thanks anton28. Bought the springs and lowering caps. Ya seems like a great guy.
  2. 2

    Lowering springs and caps

    Green viper 1 pm sent
  3. 2

    Just wrapped my Console and Shifter bezel What do you think?

    I cant recall the correct way to release the panel from this pin. I do remember reading about it in here though, so the answer is in one of these threads. As for the rear speaker panel, I think it will look great wrapped! Once I get through these projects, i think I might have a go at the...
  4. 2

    Just wrapped my Console and Shifter bezel What do you think?

    Liked yours so much i just ordered enough to do console, shifter bezel, and both doors....I have a vert and I think you are correct in saying it will look sharp....well only if I have half the application skill that you do.
  5. 2

    Plastic charging pin cover?

    Called and left a message with my number. Thanks again!
  6. 2

    Plastic charging pin cover?

    Yes! Thats great!! Thanks so much!
  7. 2

    Gen 3 - Gen 4 hood swap

    Xviper builds them for half the price and I think Vipair does as well but I am uncertain what he charges.
  8. 2

    Plastic charging pin cover?

    Thanks PeterMJ, ill wait to hear from VPA and if they cant help, I give them a shot as well.
  9. 2

    Plastic charging pin cover?

    Email sent. Thanks again Steve.
  10. 2

    Plastic charging pin cover?

    Thanks guys! Looked through VPA and didnt see anything but an email would make certain. If nothing there Ill try X2 builders and Scharf.
  11. 2

    Gen 3 - Gen 4 hood swap

    Man I love that look....want one. Waiting for Vipair to put them on sale.......hopefully....please?
  12. 2

    Plastic charging pin cover?

    Hello all, Was under the hood and broke the red plastic positive charging pin cover. Where would I find one? Have been searching but no luck yet. Thanks in advance.
  13. 2

    Just installed Double D mods double din conversion carbon bezel and console

    Looks great
  14. 2

    $3000 to spend... What aftermarket wheels to buy :)

    ViperCobra PM sent
  15. 2

    Mecum

    The kid got bid up...and bad
  16. 2

    Gen 4 Exhaust On My Gen 3

    TORQUE, I have done exactly this to my 03, replaceing the old system with an 08. It was as easy as you have stated and to gut the secondary cat, just remove it and hollow it out. I used an electric jack hammer. It took about 20 to 30 minutes for each side. I read a thread in here on how...
  17. 2

    What are your thoughts on PlastiDip?

    Nice write up. I have experimented with it on the rims of my Porsche and they look good....but only for a while. After a few hundred kms. it starts to chip etc. Paint, (powder coating etc. will hold up much longer. Great product if you are uncertain about the final look of your project, as...
  18. 2

    viper engine and srt10 truck compatability question

    Thanks Steve. Thought there were a few issues to consider.
  19. 2

    viper engine and srt10 truck compatability question

    Hello Gents. Quick q that I cant find the answer for ...Are the 03 srt10 viper engine interchangeable with the 04-06 srt10 truck engines? I recall reading something saying no but want to be sure...may have a line on an engine for a spare is all. Thanks in advance.
  20. 2

    How to fix squeak in top on 03 SRT10?

    I have an 03 vert. The squeak is the latch that holds top secure in the down position, or at least it was on my car. It has come loose. It takes some fiddling to get to it, but can be fixed. There is a thread on it in here.
  21. 2

    Huge variations in Oil consumption....

    Thanks ViperTony and Steve-Indy. Im hoping it is toast so I can get on with this build...the kind of push I need to get it done...lol. Might have to do with hard cornering like you suggest, or a poor system of measurement, or a combination of all. Thanks for the input and I will contact...
  22. 2

    Huge variations in Oil consumption....

    Hmmm....I have been following my cars oil consumption the past year and it variesdrasticly. It uses 1/2 a litre for a 1000 miles approx. and then in the next it has used 4, and the 3rd thousand it is back to 1/2??? Something is up but Im not sure what. No smoke, knocks, or leaks and I have...
  23. 2

    Front Coilover, Gen 3-4 question

    Would you part with just the lowering caps?
  24. 2

    To drive, or not to drive?

    2003 with 50000 miles....in Calgary. Nuff said
  25. 2

    Vinyl wrapping your SRT?

    Hey cujo. I have done both...sort of. I have done my porsche cayenne rims and trim in plasti dip and love it. I started on vinyl for my viper but its a handful, and pulled out before I screwed things up too badly. There is an art to it, to get a clean wrinkle free result. I suggest watching...

Latest posts

Members online

Total: 987 (members: 4, guests: 983)

Forum statistics

Threads
153,839
Posts
1,686,670
Members
18,448
Latest member
JpKL

Share this page

Top