Search results

  1. V

    High flow heads in stock

    We now have in stock ready to ship our highest flowing heads,see our webb site for details and flow #s www.vipersbyelite.com. 2 sets with lowered compression(8.9:1) for higher boost.2 sets raised 10:1 for naturally aspirated.These are for gen2 only
  2. V

    Side Sill Cover Pictures

    349/set customized however you like
  3. V

    My new Interior by Elite Motorsports

    Bill you did a great Job and have an awesome car.We just recieved your core interior.these have to be the cleanest exchange pieces i have ever seen,seems ashame to tear them down.Great job of taking care of a great car
  4. V

    Are there any aftermarket pistons out there?

    There are plenty of Manufacturers of viper pistons....Ross,JE.Diamond ect it is impotant to remember that they are custom built for each application and there are many specific specs required.compression height,rod length,deck height.ect. you will need to go to a dished piston to lower your...
  5. V

    Side Sill Cover Pictures

    Use a heat gun to remove and install as it will reactivate the adhesive
  6. V

    Side Sill Cover Pictures

    <font color="blue"><font color="blue"> These High Quality Durable Covers can be color matched to your car with our Photogenesis Process or in Real Carbon Fiber with a deep epoxy coating for a Beautiful Finish. You can also remove your old sill screw covers as these come with matched fillers...
  7. V

    Top feed custom fuel rails in stock!

    These are well built rails
  8. V

    Blue custom seats only available

    I will inquire on shipping charges monday and yes the white is glare
  9. V

    A little "show" to match the "go" (pic)

    Re: A little \"show\" to match the \"go\" (pic) Sean tell Dave nice work.....under all that personality there is skills to :)
  10. V

    Group buy on side sill covers have all been shipped

    Bump
  11. V

    Group buy on side sill covers have all been shipped

    We have now shipped all side sill covers for the group buy.I hope all enjoy as these are great pieces and will make a great enhancement to your viper
  12. V

    Complete fuel system upgrade packages

    Cost will vary depending on your needs and setup.call for info
  13. V

    Intake Manifold

    Actually the best way to get great throttle response and gain low end torque as well as high end would be with 1 t.b per cylinder.once they are all syncronized there is no tunning other than PCM tunning that can be complex and usually cannot utilize the oem PCM,but the issues of the rear banks...
  14. V

    Blue custom seats only available

    The seats on the right with the sneaky pete logo are available for immediate delivery.This is for seats only.Sorry for the brightness of the picture but i can tell you that they are a perfect color match to the 96/97.This set is available for 1900/exchange.They are brandnew
  15. V

    Complete fuel system upgrade packages

    Wether you are going to 700rwhp or 1700rwhp.we have the complete fuel system upgrades for you from the tank to the injectors
  16. V

    Intake Manifold

    Here is a manifold that we are currently working on.it will utilize a 10 T.B design,left and right bank will be inducted seperately.We are expecting great gains on both ends of the RPM range along with the ability to increase the revs http://www.vipersbyelite.com/viper_056.htm
  17. V

    Clearing the air of fear of "creamfuff "non forced inducted vipers

    Re: Clearing the air of fear of \"creamfuff \"non forced inducted vipers Good thing i dont write a book.Organised grammer, punctuation not one of my stronger points :)
  18. V

    Is this A/F ratio okay ?

    I would not call it too rich.The add says it all, 10.5:1 safe accross the board.For a supercharged car there is nothing wrong with that.you also have to take into consideration variables(humid ambiant air temps,gas,room for error.It is far better to be on that side to allow for the variables...
  19. V

    Hey Tampa area girls...................

    Stop by and say hello
  20. V

    HELP!! I've lock myself out of the trunk!!!

    Re: HELP!! I\'ve lock myself out of the trunk!!! The Gen1 ignition is very easy for a locksmith to cut an impression.They will come to your car and believe it or not it is as simple as using a file and key blank.Each time the blank is installed it will leave impressions it is then removed and...
  21. V

    Clearing the air of fear of "creamfuff "non forced inducted vipers

    Clearing the air of fear of \"creamfuff \"non forced inducted vipers I posted this as a reply to a thread on gts r/t10 discusion and though that it should have its own post to hopefully clear the air There are a lot of misconceptions about these pistons.00 and up came out with a Hypereutectic...
  22. V

    Do I have forged pistons or cast iron?

    There are a lot of misconceptions about these pistons.00 and up came out with a Hypereutectic alloy cast(aluminum)piston.These are a very good and strong piston that are used on many late model high performance cars.The Hypereutectic alloys are much tougher than the alloys used in ordinary cast...
  23. V

    Cheap Head Gaskets For Sale

    These are the original gen1 composite PROBLEM gaskets.They might look good on someones wall but i wouldnt put them on the car
  24. V

    Crower Roller Rockers

    Exactly!!!
  25. V

    SRT Carbon Fiber Dash Pictures

    I dont know where you got the information that our C.F hoods are the old hoods coated.But it is INCORRECT.

Latest posts

Members online

Total: 1,061 (members: 7, guests: 1,054)

Forum statistics

Threads
153,839
Posts
1,686,670
Members
18,450
Latest member
Bcanfield

Share this page

Top