Search results
-
R
94 hood creep up.....
My first question would be "Are you sure both latches (L&R) are securely latching?" If not, that would explain it. You should hear and feel the latches on both sides click as they latch and you shouldn't be able to lift the hood in the headlight area.- Rich Detert
- Thread
- Replies: 5
- Forum: RT/10 and GTS Discussions
-
R
Some things I just found-out about the '03 Viper
Re: Some things I just found-out about the \'03 Viper Prior to my Viper I built a Cobra Replica myself. It was a Shell Valley Kit. It even made it into a few magazines. In it's first incarnation it was Red (go figure) and was powered by a built 440 (Mopar) with Stage IV heads and a Richmond 5...- Rich Detert
- Post #19
- Forum: SRT10 and SRT10 Coupe Discussions
-
R
who's our contact for tires at the tire rack?
Re: who\'s our contact for tires at the tire rack? Unless I'm mistaken, It's Luke at Tirerack who you need to talk to.- Rich Detert
- Post #2
- Forum: RT/10 and GTS Discussions
-
R
VOI 7 Nashville-Sept.2002
Some people keep talking about the number of Viper and attendees being down at St.Louis. Unless I'm mistaken, only 600 cars being able to enter was decided even before the invitations were sent out to us for attending VOI6. If they're going to let more cars enter it's all the better for us! I...- Rich Detert
- Post #58
- Forum: RT/10 and GTS Discussions
-
R
2002 ACR Coupe Raffle.....
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR> Bad Viper Wouldn't it be nice if there was an upcoming Comp coupe to raffle????????????????? <HR></BLOCKQUOTE> Raffle of a Competition Coupe! (Pant, Pant, Drool!) I wish!- Rich Detert
- Post #7
- Forum: RT/10 and GTS Discussions
-
R
2002 ACR Coupe Raffle.....
Did anyone else read the statement made by Tony Estes in the new issue of Viper Magazine about raffle tickets soon being available for a 2002 ACR GTS Coupe! It's in the club news section in his presidents message. I know I've got my check book ready to buy a few tickets.- Rich Detert
- Thread
- Replies: 10
- Forum: RT/10 and GTS Discussions
-
R
Help Me Find Rich Detert?
Hi Jon, Hopefully the e-mail I sent you got through. If not, Norman got the e-mail address right it's [email protected] that's the best one to reach me at. You can also reach me by phone at 636-942-4690 after about 5 pm CST. Was my website not working at all? AOL seems to be a little slow...- Rich Detert
- Post #3
- Forum: RT/10 and GTS Discussions
-
R
Hemi Viper, not Sir Hiss (pic)
If that's the car I think it is, I looked at it in the race pits at the Mopar Nationals. I asked the owner what it ran and he said "It ran a 9.40 with the driver shifting from 1st to 3rd". He was giving the driver (who was standing there) a little bit of sarcasm. He was sure with some dialing...- Rich Detert
- Post #5
- Forum: RT/10 and GTS Discussions
-
R
Twin Supercharger Package Revealed! (Pics)
Even the word Awesome is an understatement! Everyone will want details about HP gains, ease of installation and price as the info becomes available.- Rich Detert
- Post #2
- Forum: Performance Modifications
-
R
Twin Supercharger Package Revealed! (Pics)
Even the word Awesome is an understatement! Everyone will want details about HP gains, ease of installation and price as the info becomes available.- Rich Detert
- Post #2
- Forum: RT/10 and GTS Discussions
-
R
Is it turning into an obsession?
I like the color red on a car (or truck), but is it turning into an obsession with me? (not that I want to be cured). A couple of pics of my Red Viper with my Red Dakota R/T and my Red LeBaron.- Rich Detert
- Thread
- Replies: 4
- Forum: RT/10 and GTS Discussions
-
R
Gateway VCA Fall Cruise Pics
On sunday Oct. 28 the Gateway VCA held it's fall cruise to Taum Sauk Mountain State Park. Taum Sauk Mountain is the highest point in the state of Missouri. It was certified as such by Dan Govero's Engineering Firm (Dan is a Gateway VCA Member). The cruise covered a little over 200 miles...- Rich Detert
- Thread
- Replies: 0
- Forum: RT/10 and GTS Discussions
-
R
need more help please
The end of the arm has a cap on it that pulls/twists up and allows you to get to the nuts that hold the arms on.- Rich Detert
- Post #2
- Forum: RT/10 and GTS Discussions
-
R
Anyone repaint the dash on Gen I?
Hi Matt, Sorry I didn't get back to you yet via email. Here are pics of Rob McPhee's dash that I painted. I used Organsol Black lacquer on it. That's the paint that Chrysler used on all the old Hi-Performace cars. It has a slight texture to it and a satin finish. It should be available at any...- Rich Detert
- Post #2
- Forum: RT/10 and GTS Discussions
-
R
Quiz for the day...
Don't feel too bad Tony, in the video the stripes looked white to me. That was my first run, I ran an 11.40 @ 126 mph. I talked to the guy who made the video at the track that day. I just wasn't expecting him to post it on the web. He said he wasn't expecting much from how easy I launched the...- Rich Detert
- Post #5
- Forum: RT/10 and GTS Discussions
-
R
60' times with MXX3's
Re: 60\' times with MXX3\'s The best 60 ft. time I've had on Mxxx3's is a 1.75. The tire pressure was 22 psi (as Tom Welch recommended). I launched at about 1600-1800 rpms and fully released the clutch. The ET was 12.30 @ 112 mph. Too much rpms off the line and all you do is spin or end up...- Rich Detert
- Thread
- Replies: 0
- Forum: Viper Racing/Dyno Results/Time Slips
-
R
what time should I expect the notification call?
I'll have to wait until I get home from work to find out who the winner is (bummer). Congratulations to who ever it is! (Although I know who I hope it will be.)- Rich Detert
- Post #5
- Forum: RT/10 and GTS Discussions
-
R
Why do you like stripes vs no stripes on your Viper?
Well, Mark O just proved I'm not alone in my possible insanity. I thought that I might be the only one who would stripe their mailbox to match their car.- Rich Detert
- Post #35
- Forum: RT/10 and GTS Discussions
-
R
Why do you like stripes vs no stripes on your Viper?
Even though I striped it because I wanted them, just about everyone says the car looks MUCH better with the stripes than without.- Rich Detert
- Post #7
- Forum: RT/10 and GTS Discussions
-
R
Anyone in the St. Louis Area?
I'm planning on being there at the cruise in Fenton on friday. Monster Mopar Weekend XVII is also going on this weekend at Gateway International Raceway on Saturday and Sunday. There are usually a several Vipers there along with all the classic Mopar musclecars and race cars. There's also a...- Rich Detert
- Post #3
- Forum: RT/10 and GTS Discussions
-
R
Manual Tranny???
I make a replacement shifter shaft for the Viper. Here's a link to one of my post about it with a few responses from people who have them. Post on Shifter Shaft I'm in the process of building a new web-site for all my online stuff (shifter parts, Viper stuff, Pics, etc.). I hope to have...- Rich Detert
- Post #3
- Forum: RT/10 and GTS Discussions
-
R
First drive new 02 RAM 1500
To answer a few of the questions: The diesel will be available for 2003 in the 2500 series Rams. (We're supposed to start building pilot vehicles of them in December). The 5.7 Hemi with 320 HP will also be available for 2003 along with a High output 4.7 with 270 HP. (Let the competition chew...- Rich Detert
- Post #4
- Forum: RT/10 and GTS Discussions
-
R
Show me your customized dash!!!!
Here's a pic of Zippy's (Rob McPhee) dash in his 93 that I painted for him.- Rich Detert
- Post #5
- Forum: RT/10 and GTS Discussions
-
R
Bolt holes for 5 pt. harness, what size?
I know that the ones behind the seat are 7/16th fine thread (because I've recently installed a Northwind Roll Bar in my Viper and it uses those attaching points). I'm pretty sure the lower holes are the same size. BTW, Thanks to Mike Trost at Northwind Engineering for faxing me a copy of the...- Rich Detert
- Post #2
- Forum: RT/10 and GTS Discussions
-
R
How about a Best Avatar Contest?
Nadine gets my vote! Dave's is cool too! I thought Jon B's old one was pretty good too. I think it might be time to update mine.- Rich Detert
- Post #15
- Forum: RT/10 and GTS Discussions
