Search results

  1. M

    replacing fuel grommet

    simple, take off the rear wheel, remove the black plastic fasteners in the wheel well, and carefully bend back the inner fender liner enough so you can remove the vent tube and slide the filler neck out.
  2. M

    replacing fuel grommet

    You have to remove the filler neck first, and then you should be able to remove the grommet and install the new one into the tank. Getting the filler neck off is a fun little task in itself.
  3. M

    Selling my Roe/Heads/Cam RT/10

    Just listed by 94 Rt/10 here on the VCA. ViperClub Classifieds - 94 RT/10 Roe/Heads/Cam 645RWHP 745RWTQ - Powered by PhotoPost Classifieds I have to sell this before moving to a GTS, have my eye on a few right now. The car is located in Chicagoland, click on the pic below for a short vid at...
  4. M

    been almost a week, not a single call

    I would buy your car in a second if I could sell my 94 Roe/Heads/Cam car!!!! martyb
  5. M

    Trade Showcar Z06 for 96 B/W GTS?

    ZexZ06, Very nice Z06, and good luck with the sale/trade. For what its worth, I have a supercharged 94 RT/10, 645rwhp, 748rwtq, with 28000 miles, 3 piece top, all original parts, and I have been trying to find someone willing to trade for a stock GTS. I have the car listed for $38,000/offer...
  6. M

    Gen II exhaust on Gen I

    I thought I read that the Gen 1 manifolds actually flow better than the Gen 2, no???
  7. M

    Looking for a Gen 1 Viper (Newbie)

    I can take a shot, no problem Mitch! I want a ride in yours when its done!
  8. M

    Looking for a Gen 1 Viper (Newbie)

    Thanks for the compliments. Matt, it was nice meeting you and the others from WI, MN.
  9. M

    Looking for a Gen 1 Viper (Newbie)

    Very sorry to hear about your father. My S/C, Heads, Cam red Gen 1 is for sale, I am in Chicagoland. Car has 645rwhp, 27000 miles, 3 piece trunk top, all original parts. Click on the photo below, car makes a little noise.
  10. M

    Yellow Gen 1 Lafox, Illinois

    Saw a yellow Gen 1 this weekend in LaFox, Illinois. Anyone on this board? martyb
  11. M

    Walbro 255, what else??

    99R/T10, They did not offer to swap it out or give a refund
  12. M

    Walbro 255, what else??

    tree, let me know the exact part number that you used. Walbro has a ton of 255 pumps, i just put a 340 in my car today, and that fixed my issue, amen!! Its so nice when a plan comes together. Putting the tank bank in an RT/10 is a pain though, jesus. TI did not say when the problem started...
  13. M

    Walbro 255, what else??

    Update, just spoke to TI Auto, who makes the Walbro, and there is known issue with the F20000169 pump. They are not shipping them currently until they fix the issue, which will be 2-3 weeks. Anyone have any thoughts on a similar in tank pump? martyb
  14. M

    Walbro 255, what else??

    Thanks Big, just wondering if I should change the regulator while I have it out.
  15. M

    Walbro 255, what else??

    hhhhhhhhhmmmmmmmmmmmmmmmmmm
  16. M

    Walbro 255, what else??

    Have my tank out, going to replace the Walbro pump that is less than a year old, which was installed by PBJ. Anything else I should replace while I have the tank out? I cannot believe this pump only lived for about 1800 miles. martyb
  17. M

    o2 sensors Gen 1

    All right, before I start the tank removal, just wondering if my low fuel pressure could be the MSD BAP? Any way to test it? I would hate to remove the tank and replace the pump, only to find out it was not needed. Also, any tips on tank removal? martyb
  18. M

    o2 sensors Gen 1

    Thanks Tom, yeah, its a fun job for sure!! I am hoping the filter will fix the problem, but I am not holding my breath. If its the pump, I am wondering if it is still under any warranty, hmmmm
  19. M

    o2 sensors Gen 1

    All right, my issue is fuel pressure. I am going to try Tom's suggestion and replace the filter, but I am guessing its the pump. PBJ just put in a Walbro 255 less than a year ago, and I have driven the car about 1800 miles since the install. Are these pumps that weak??
  20. M

    o2 sensors Gen 1

    99R/T10 Had the MSD wires from Sean, just replaced them with new wires from Tator, along with new plugs and O2 sensors. One thing I forgot to mention, the Walbro 255 pump that pbj installed is really singing once the car warms up. I can really hear it when the car is running, even at idle...
  21. M

    o2 sensors Gen 1

    by the way, 1/2 throttle is still fine, only under more than 1/2 throttle does is miss.
  22. M

    o2 sensors Gen 1

    2 new O2 sensors installed, car is still missing when warmed up. I can tell it is very rich(burns your eyes, popping on decel). Thinking of trying to replace the MAP sensor. Would a faulty MAP, TPS, cam or crank sensor cause a rich condition? martyb
  23. M

    Viper - Gen one vs Gen two at track

    I have a Gen 1 Roe 10#, rockers/heads/cam. I put down about 200 more rwhp than a stock gen 2, so at the drag strip it shouldn't even be close. Gen 2 has better suspension though. martyb
  24. M

    AEM...Where to get one

    Thanks Joseph, planning on contacting them tomorrow!
  25. M

    AEM...Where to get one

    amen brother!!

Latest posts

Staff online

Members online

Total: 1,063 (members: 8, guests: 1,055)

Forum statistics

Threads
153,839
Posts
1,686,670
Members
18,448
Latest member
JpKL

Share this page

Top